cyplo/dotfiles
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Merge branch 'master' of github.com:cyplo/dotfiles

Browse source
This commit is contained in:
Cyryl Plotnicki-Chudyk 2014-09-02 10:22:43 +02:00
commit feb3a8e25b
18 changed files with 141 additions and 166 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
.Slic3r/filament/Simple Mode.ini → .Slic3r/filament/black pla 0.4.ini
View file

@ -1,5 +1,5 @@
# generated by Slic3r 1.1.6 on Sat Aug 2 20:10:57 2014 # generated by Slic3r 1.1.7 on Sun Aug 17 12:07:47 2014
bed_temperature = 60 bed_temperature = 70
bridge_fan_speed = 100 bridge_fan_speed = 100
cooling = 1 cooling = 1
disable_fan_first_layers = 1 disable_fan_first_layers = 1
@ -7,10 +7,10 @@ extrusion_multiplier = 1
fan_always_on = 0 fan_always_on = 0
fan_below_layer_time = 15 fan_below_layer_time = 15
filament_diameter = 1.75 filament_diameter = 1.75
first_layer_bed_temperature = 60 first_layer_bed_temperature = 80
first_layer_temperature = 230 first_layer_temperature = 210
max_fan_speed = 100 max_fan_speed = 100
min_fan_speed = 55 min_fan_speed = 55
min_print_speed = 10 min_print_speed = 10
slowdown_below_layer_time = 5 slowdown_below_layer_time = 5
temperature = 230 temperature = 210

10
.Slic3r/filament/black pla.ini → .Slic3r/filament/black pla 0.5.ini
View file

@ -1,5 +1,5 @@
# generated by Slic3r 1.1.6 on Sun Aug 3 18:45:33 2014 # generated by Slic3r 1.1.7 on Sun Aug 17 11:01:37 2014
bed_temperature = 60 bed_temperature = 70
bridge_fan_speed = 100 bridge_fan_speed = 100
cooling = 1 cooling = 1
disable_fan_first_layers = 1 disable_fan_first_layers = 1
@ -7,10 +7,10 @@ extrusion_multiplier = 1
fan_always_on = 0 fan_always_on = 0
fan_below_layer_time = 15 fan_below_layer_time = 15
filament_diameter = 1.75 filament_diameter = 1.75
first_layer_bed_temperature = 60 first_layer_bed_temperature = 70
first_layer_temperature = 235 first_layer_temperature = 190
max_fan_speed = 100 max_fan_speed = 100
min_fan_speed = 55 min_fan_speed = 55
min_print_speed = 10 min_print_speed = 10
slowdown_below_layer_time = 5 slowdown_below_layer_time = 5
temperature = 235 temperature = 190

16
.Slic3r/filament/fine purple pla.ini
View file

@ -1,16 +0,0 @@
# generated by Slic3r 1.1.7 on Thu Aug 7 19:32:55 2014
bed_temperature = 60
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 15
filament_diameter = 1.75
first_layer_bed_temperature = 60
first_layer_temperature = 235
max_fan_speed = 100
min_fan_speed = 55
min_print_speed = 10
slowdown_below_layer_time = 5
temperature = 235

12
.Slic3r/filament/purple pla.ini → .Slic3r/filament/pink abs 0.5.ini
View file

@ -1,16 +1,16 @@
# generated by Slic3r 1.1.7 on Thu Aug 7 07:17:14 2014 # generated by Slic3r 1.1.7 on Sat Aug 16 14:20:52 2014
bed_temperature = 60 bed_temperature = 90
bridge_fan_speed = 100 bridge_fan_speed = 100
cooling = 1 cooling = 1
disable_fan_first_layers = 1 disable_fan_first_layers = 1
extrusion_multiplier = 1 extrusion_multiplier = 1
fan_always_on = 0 fan_always_on = 0
fan_below_layer_time = 15 fan_below_layer_time = 60
filament_diameter = 1.75 filament_diameter = 1.75
first_layer_bed_temperature = 60 first_layer_bed_temperature = 90
first_layer_temperature = 235 first_layer_temperature = 235
max_fan_speed = 100 max_fan_speed = 100
min_fan_speed = 55 min_fan_speed = 60
min_print_speed = 10 min_print_speed = 10
slowdown_below_layer_time = 5 slowdown_below_layer_time = 30
temperature = 235 temperature = 235

16
.Slic3r/filament/pink abs.ini
View file

@ -1,16 +0,0 @@
# generated by Slic3r 1.1.7 on Sat Aug 9 08:50:38 2014
bed_temperature = 85
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 1.75
first_layer_bed_temperature = 85
first_layer_temperature = 240
max_fan_speed = 100
min_fan_speed = 60
min_print_speed = 10
slowdown_below_layer_time = 10
temperature = 240

46
.Slic3r/print/Simple Mode.ini → .Slic3r/print/coarse abs 0.5.ini
View file

@ -1,27 +1,27 @@
# generated by Slic3r 1.1.6 on Sun Aug 3 10:31:57 2014 # generated by Slic3r 1.1.7 on Sat Aug 16 14:32:30 2014
avoid_crossing_perimeters = 0 avoid_crossing_perimeters = 0
bottom_solid_layers = 3 bottom_solid_layers = 3
bridge_acceleration = 0 bridge_acceleration = 0
bridge_flow_ratio = 1 bridge_flow_ratio = 1
bridge_speed = 60 bridge_speed = 15
brim_width = 0 brim_width = 0
complete_objects = 0 complete_objects = 0
default_acceleration = 0 default_acceleration = 0
dont_support_bridges = 1 dont_support_bridges = 1
external_perimeter_speed = 70% external_perimeter_speed = 15
external_perimeters_first = 0 external_perimeters_first = 1
extra_perimeters = 1 extra_perimeters = 1
extruder_clearance_height = 20 extruder_clearance_height = 20
extruder_clearance_radius = 20 extruder_clearance_radius = 20
extrusion_width = 0 extrusion_width = 0
fill_angle = 45 fill_angle = 45
fill_density = 35% fill_density = 40%
fill_pattern = honeycomb fill_pattern = rectilinear
first_layer_acceleration = 0 first_layer_acceleration = 0
first_layer_extrusion_width = 200% first_layer_extrusion_width = 200%
first_layer_height = 0.4 first_layer_height = 0.2
first_layer_speed = 45% first_layer_speed = 15
gap_fill_speed = 20 gap_fill_speed = 15
gcode_comments = 0 gcode_comments = 0
infill_acceleration = 0 infill_acceleration = 0
infill_every_layers = 1 infill_every_layers = 1
@ -29,10 +29,10 @@ infill_extruder = 1
infill_extrusion_width = 0 infill_extrusion_width = 0
infill_first = 0 infill_first = 0
infill_only_where_needed = 1 infill_only_where_needed = 1
infill_speed = 60 infill_speed = 12
interface_shells = 0 interface_shells = 0
layer_height = 0.4 layer_height = 0.4
min_skirt_length = 0 min_skirt_length = 20
notes = notes =
only_retract_when_crossing_perimeters = 1 only_retract_when_crossing_perimeters = 1
ooze_prevention = 0 ooze_prevention = 0
@ -41,21 +41,21 @@ overhangs = 1
perimeter_acceleration = 0 perimeter_acceleration = 0
perimeter_extruder = 1 perimeter_extruder = 1
perimeter_extrusion_width = 0 perimeter_extrusion_width = 0
perimeter_speed = 30 perimeter_speed = 15
perimeters = 3 perimeters = 3
post_process = post_process =
raft_layers = 0 raft_layers = 0
resolution = 0 resolution = 0
seam_position = aligned seam_position = random
skirt_distance = 6 skirt_distance = 6
skirt_height = 1 skirt_height = 1
skirts = 1 skirts = 1
small_perimeter_speed = 30 small_perimeter_speed = 15
solid_fill_pattern = hilbertcurve solid_fill_pattern = rectilinear
solid_infill_below_area = 70 solid_infill_below_area = 70
solid_infill_every_layers = 5 solid_infill_every_layers = 7
solid_infill_extrusion_width = 0 solid_infill_extrusion_width = 0
solid_infill_speed = 60 solid_infill_speed = 12
spiral_vase = 0 spiral_vase = 0
standby_temperature_delta = -5 standby_temperature_delta = -5
support_material = 0 support_material = 0
@ -66,14 +66,14 @@ support_material_extrusion_width = 0
support_material_interface_extruder = 1 support_material_interface_extruder = 1
support_material_interface_layers = 3 support_material_interface_layers = 3
support_material_interface_spacing = 0 support_material_interface_spacing = 0
support_material_interface_speed = 100% support_material_interface_speed = 15
support_material_pattern = pillars support_material_pattern = pillars
support_material_spacing = 2.5 support_material_spacing = 2.5
support_material_speed = 60 support_material_speed = 15
support_material_threshold = 0 support_material_threshold = 0
thin_walls = 1 thin_walls = 1
threads = 2 threads = 8
top_infill_extrusion_width = 0 top_infill_extrusion_width = 0
top_solid_infill_speed = 50 top_solid_infill_speed = 10
top_solid_layers = 3 top_solid_layers = 4
travel_speed = 130 travel_speed = 100

14
.Slic3r/print/fine0.4.ini → .Slic3r/print/coarse pla 0.4.ini
View file

@ -1,4 +1,4 @@
# generated by Slic3r 1.1.7 on Sat Aug 9 08:03:40 2014 # generated by Slic3r 1.1.7 on Sun Aug 17 11:50:25 2014
avoid_crossing_perimeters = 1 avoid_crossing_perimeters = 1
bottom_solid_layers = 3 bottom_solid_layers = 3
bridge_acceleration = 0 bridge_acceleration = 0
@ -15,11 +15,11 @@ extruder_clearance_height = 20
extruder_clearance_radius = 20 extruder_clearance_radius = 20
extrusion_width = 0 extrusion_width = 0
fill_angle = 45 fill_angle = 45
fill_density = 40% fill_density = 35%
fill_pattern = honeycomb fill_pattern = rectilinear
first_layer_acceleration = 0 first_layer_acceleration = 0
first_layer_extrusion_width = 200% first_layer_extrusion_width = 200%
first_layer_height = 0.4 first_layer_height = 0.3
first_layer_speed = 45% first_layer_speed = 45%
gap_fill_speed = 20 gap_fill_speed = 20
gcode_comments = 0 gcode_comments = 0
@ -31,8 +31,8 @@ infill_first = 0
infill_only_where_needed = 1 infill_only_where_needed = 1
infill_speed = 60 infill_speed = 60
interface_shells = 0 interface_shells = 0
layer_height = 0.2 layer_height = 0.3
min_skirt_length = 50 min_skirt_length = 30
notes = notes =
only_retract_when_crossing_perimeters = 1 only_retract_when_crossing_perimeters = 1
ooze_prevention = 0 ooze_prevention = 0
@ -51,7 +51,7 @@ skirt_distance = 6
skirt_height = 1 skirt_height = 1
skirts = 1 skirts = 1
small_perimeter_speed = 30 small_perimeter_speed = 30
solid_fill_pattern = hilbertcurve solid_fill_pattern = rectilinear
solid_infill_below_area = 70 solid_infill_below_area = 70
solid_infill_every_layers = 5 solid_infill_every_layers = 5
solid_infill_extrusion_width = 0 solid_infill_extrusion_width = 0

2
.Slic3r/print/coarse0.4.ini → .Slic3r/print/coarse pla 0.5.ini
View file

@ -1,4 +1,4 @@
# generated by Slic3r 1.1.6 on Sun Aug 3 13:20:02 2014 # generated by Slic3r 1.1.7 on Sun Aug 17 10:21:49 2014
avoid_crossing_perimeters = 1 avoid_crossing_perimeters = 1
bottom_solid_layers = 3 bottom_solid_layers = 3
bridge_acceleration = 0 bridge_acceleration = 0

30
.Slic3r/print/fine0.5 abs.ini → .Slic3r/print/fine abs 0.5.ini
View file

@ -1,14 +1,14 @@
# generated by Slic3r 1.1.7 on Sun Aug 10 11:56:49 2014 # generated by Slic3r 1.1.7 on Sat Aug 16 14:16:18 2014
avoid_crossing_perimeters = 1 avoid_crossing_perimeters = 1
bottom_solid_layers = 3 bottom_solid_layers = 3
bridge_acceleration = 0 bridge_acceleration = 0
bridge_flow_ratio = 1 bridge_flow_ratio = 1
bridge_speed = 30 bridge_speed = 15
brim_width = 0 brim_width = 0
complete_objects = 0 complete_objects = 0
default_acceleration = 0 default_acceleration = 0
dont_support_bridges = 1 dont_support_bridges = 1
external_perimeter_speed = 70% external_perimeter_speed = 15
external_perimeters_first = 1 external_perimeters_first = 1
extra_perimeters = 1 extra_perimeters = 1
extruder_clearance_height = 20 extruder_clearance_height = 20
@ -19,9 +19,9 @@ fill_density = 40%
fill_pattern = honeycomb fill_pattern = honeycomb
first_layer_acceleration = 0 first_layer_acceleration = 0
first_layer_extrusion_width = 200% first_layer_extrusion_width = 200%
first_layer_height = 0.35 first_layer_height = 0.2
first_layer_speed = 45% first_layer_speed = 15
gap_fill_speed = 20 gap_fill_speed = 15
gcode_comments = 0 gcode_comments = 0
infill_acceleration = 0 infill_acceleration = 0
infill_every_layers = 1 infill_every_layers = 1
@ -29,10 +29,10 @@ infill_extruder = 1
infill_extrusion_width = 0 infill_extrusion_width = 0
infill_first = 0 infill_first = 0
infill_only_where_needed = 1 infill_only_where_needed = 1
infill_speed = 30 infill_speed = 12
interface_shells = 0 interface_shells = 0
layer_height = 0.2 layer_height = 0.2
min_skirt_length = 50 min_skirt_length = 20
notes = notes =
only_retract_when_crossing_perimeters = 1 only_retract_when_crossing_perimeters = 1
ooze_prevention = 0 ooze_prevention = 0
@ -41,7 +41,7 @@ overhangs = 1
perimeter_acceleration = 0 perimeter_acceleration = 0
perimeter_extruder = 1 perimeter_extruder = 1
perimeter_extrusion_width = 0 perimeter_extrusion_width = 0
perimeter_speed = 30 perimeter_speed = 15
perimeters = 3 perimeters = 3
post_process = post_process =
raft_layers = 0 raft_layers = 0
@ -50,12 +50,12 @@ seam_position = random
skirt_distance = 6 skirt_distance = 6
skirt_height = 1 skirt_height = 1
skirts = 1 skirts = 1
small_perimeter_speed = 30 small_perimeter_speed = 15
solid_fill_pattern = hilbertcurve solid_fill_pattern = hilbertcurve
solid_infill_below_area = 70 solid_infill_below_area = 70
solid_infill_every_layers = 5 solid_infill_every_layers = 5
solid_infill_extrusion_width = 0 solid_infill_extrusion_width = 0
solid_infill_speed = 30 solid_infill_speed = 12
spiral_vase = 0 spiral_vase = 0
standby_temperature_delta = -5 standby_temperature_delta = -5
support_material = 0 support_material = 0
@ -66,14 +66,14 @@ support_material_extrusion_width = 0
support_material_interface_extruder = 1 support_material_interface_extruder = 1
support_material_interface_layers = 3 support_material_interface_layers = 3
support_material_interface_spacing = 0 support_material_interface_spacing = 0
support_material_interface_speed = 100% support_material_interface_speed = 15
support_material_pattern = pillars support_material_pattern = pillars
support_material_spacing = 2.5 support_material_spacing = 2.5
support_material_speed = 30 support_material_speed = 15
support_material_threshold = 0 support_material_threshold = 0
thin_walls = 1 thin_walls = 1
threads = 8 threads = 8
top_infill_extrusion_width = 0 top_infill_extrusion_width = 0
top_solid_infill_speed = 30 top_solid_infill_speed = 10
top_solid_layers = 4 top_solid_layers = 4
travel_speed = 130 travel_speed = 100

23
.Slic3r/printer/Simple Mode.ini
View file

@ -1,23 +0,0 @@
# generated by Slic3r 1.1.6 on Sat Aug 2 20:52:03 2014
bed_size = 170,170
end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n
extruder_offset = 0x0
gcode_flavor = reprap
layer_gcode =
nozzle_diameter = 0.4
print_center = 85,85
retract_before_travel = 2
retract_layer_change = 1
retract_length = 2
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0
vibration_limit = 0
wipe = 0
z_offset = 0

4
.Slic3r/printer/printer.ini → .Slic3r/printer/printer 0.4.ini
View file

@ -1,4 +1,4 @@
# generated by Slic3r 1.1.6 on Sun Aug 3 13:18:19 2014 # generated by Slic3r 1.1.7 on Sun Aug 17 11:02:28 2014
bed_size = 170,170 bed_size = 170,170
end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n
extruder_offset = 0x0 extruder_offset = 0x0
@ -13,7 +13,7 @@ retract_length_toolchange = 10
retract_lift = 0 retract_lift = 0
retract_restart_extra = 0 retract_restart_extra = 0
retract_restart_extra_toolchange = 0 retract_restart_extra_toolchange = 0
retract_speed = 30 retract_speed = 40
start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
toolchange_gcode = toolchange_gcode =
use_firmware_retraction = 0 use_firmware_retraction = 0

2
.Slic3r/printer/printer0.5.ini → .Slic3r/printer/printer 0.5.ini
View file

@ -1,4 +1,4 @@
# generated by Slic3r 1.1.7 on Sun Aug 10 11:56:06 2014 # generated by Slic3r 1.1.7 on Sun Aug 17 10:22:06 2014
bed_size = 170,170 bed_size = 170,170
end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n
extruder_offset = 0x0 extruder_offset = 0x0

10
.Slic3r/slic3r.ini
View file

@ -1,4 +1,4 @@
# generated by Slic3r 1.1.7 on Sun Aug 10 11:56:56 2014 # generated by Slic3r 1.1.7 on Sun Aug 17 12:07:47 2014
autocenter = 1 autocenter = 1
last_output_path = /home/cyryl/RepRap/models last_output_path = /home/cyryl/RepRap/models
last_version_check = 1407388369 last_version_check = 1407388369
@ -8,9 +8,9 @@ version = 1.1.7
version_check = 1 version_check = 1
[presets] [presets]
filament = pink abs.ini filament = black pla 0.4.ini
print = fine0.5 abs.ini print = coarse pla 0.4.ini
printer = printer0.5.ini printer = printer 0.4.ini
[recent] [recent]
skein_directory = /home/cyryl/Downloads skein_directory = /home/cyryl/RepRap/models/PrusaMendel/metric-prusa-lm8uu

1
.config/terminator/config
View file

@ -5,6 +5,7 @@
[profiles] [profiles]
[[default]] [[default]]
palette = "#073642:#dc322f:#859900:#b58900:#268bd2:#d33682:#2aa198:#eee8d5:#002b36:#cb4b16:#586e75:#657b83:#839496:#6c71c4:#93a1a1:#fdf6e3" palette = "#073642:#dc322f:#859900:#b58900:#268bd2:#d33682:#2aa198:#eee8d5:#002b36:#cb4b16:#586e75:#657b83:#839496:#6c71c4:#93a1a1:#fdf6e3"
login_shell = True
background_darkness = 0.95 background_darkness = 0.95
background_type = transparent background_type = transparent
use_system_font = False use_system_font = False

2
.oh-my-zsh

@ -1 +1 @@
Subproject commit 1b7a3ea99a8b566510ab7881063148c43be6b98d Subproject commit 23bbf3cc2bffb059506b7995e34cd451dc0a947a

46
install_common.sh Executable file
View file

@ -0,0 +1,46 @@
#!/bin/bash
#zsh
sudo chsh -s `which zsh` $USER
#submodules
DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
cd $DIR
git submodule init
git submodule update --recursive
#rvm
curl -sSL https://get.rvm.io | bash -s stable
source $HOME/.rvm/scripts/rvm
rvm install ruby
#symbolic links
ln -s "$DIR/.vim" ~/.
ln -s "$DIR/.vimrc" ~/.
ln -s "$DIR/.tmux.conf" ~/.
rm -f "~/.zshrc"
ln -s "$DIR/.zshrc" ~/.
ln -s "$DIR/.oh-my-zsh" ~/.
ln -s "$DIR/.Slic3r" ~/.
ln -s "$DIR/.gitconfig.linux.private" ~/.gitconfig
ln -s "$DIR/tools" ~/
#install fonts
mkdir ~/.fonts
cp -rv "$DIR/fonts" ~/.fonts
fc-cache
#set solarized scheme
$DIR/gnome-terminal-colors-solarized/install.sh
#setting colors to solarized should result in the default proile with the following id set
#TODO: choose the profile dynamically
dconf write /org/gnome/terminal/legacy/profiles:/:b1dcc9dd-5262-4d8d-a863-c897e6d979b9/font "'Inconsolata for Powerline Medium 18'"
dconf write /org/gnome/terminal/legacy/profiles:/:b1dcc9dd-5262-4d8d-a863-c897e6d979b9/login-shell true
dconf write /org/gnome/terminal/legacy/profiles:/:b1dcc9dd-5262-4d8d-a863-c897e6d979b9/audible-bell false
dconf write /org/gnome/terminal/legacy/profiles:/:b1dcc9dd-5262-4d8d-a863-c897e6d979b9/use-system-font false
echo
echo "now go ahead and restart Gnome session"

58
install_fedora.sh
View file

@ -4,46 +4,24 @@
FEDORA_VERSION=`rpm -E %fedora` FEDORA_VERSION=`rpm -E %fedora`
sudo yum install http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$FEDORA_VERSION.noarch.rpm sudo yum install http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$FEDORA_VERSION.noarch.rpm
sudo yum install http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$FEDORA_VERSION.noarch.rpm sudo yum install http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$FEDORA_VERSION.noarch.rpm
sudo yum install vim tmux atop zsh thunderbird thunderbird-enigmail thunderbird-lightning firefox aria2 gajim lm_sensors vlc freecad sudo yum install vim tmux atop zsh thunderbird thunderbird-enigmail thunderbird-lightning firefox aria2 gajim lm_sensors vlc freecad python3-pip qt5-qtbase-devel qt5-qtwebkit-devel
sudo chsh -s `which zsh` $USER
#fetch dependencies #ReText
aria2c http://sourceforge.net/projects/pyqt/files/sip/sip-4.16.2/sip-4.16.2.tar.gz -d /tmp
tar -C /tmp -xf /tmp/sip-4.16.2.tar.gz
cd /tmp/sip-4.16.2
python3 configure.py
make
sudo make install
aria2c http://sourceforge.net/projects/pyqt/files/PyQt5/PyQt-5.3.1/PyQt-gpl-5.3.1.tar.gz -d /tmp
tar -C /tmp -xf /tmp/PyQt-gpl-5.3.1.tar.gz
cd /tmp/PyQt-gpl-5.3.1
python3 configure.py --qmake /usr/bin/qmake-qt5
make -j8
sudo make install
sudo pip-python3 install retext
DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )" DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
cd $DIR $DIR/install_common.sh
git submodule init
git submodule update --recursive
#rvm
curl -sSL https://get.rvm.io | bash -s stable
rvm install ruby
#symbolic links
ln -s "$DIR/.vim" ~/.
ln -s "$DIR/.vimrc" ~/.
ln -s "$DIR/.tmux.conf" ~/.
rm -f "$DIR/.zshrc"
ln -s "$DIR/.zshrc" ~/.
ln -s "$DIR/.oh-my-zsh" ~/.
ln -s "$DIR/.Slic3r" ~/.
ln -s "$DIR/.gitconfig.linux.private" ~/.gitconfig
ln -s "$DIR/tools" ~/
#install fonts
mkdir ~/.fonts
cp -rv "$DIR/fonts" ~/.fonts
fc-cache
#set solarized scheme
$DIR/gnome-terminal-colors-solarized/install.sh
#setting colors to solarized should result in the default proile with the following id set
#TODO: choose the profile dynamically
dconf write /org/gnome/terminal/legacy/profiles:/:b1dcc9dd-5262-4d8d-a863-c897e6d979b9/font "'Inconsolata for Powerline Medium 18'"
dconf write /org/gnome/terminal/legacy/profiles:/:b1dcc9dd-5262-4d8d-a863-c897e6d979b9/login-shell true
dconf write /org/gnome/terminal/legacy/profiles:/:b1dcc9dd-5262-4d8d-a863-c897e6d979b9/audible-bell false
dconf write /org/gnome/terminal/legacy/profiles:/:b1dcc9dd-5262-4d8d-a863-c897e6d979b9/use-system-font false
echo
echo "now go ahead and restart Gnome session"

5
install_ubuntu.sh Normal file
View file

@ -0,0 +1,5 @@
#!/bin/bash
sudo apt-get update
sudo apt-get dist-ugprade
sudo apt-get install meld