diff --git a/.Slic3r/filament/Simple Mode.ini b/.Slic3r/filament/black pla 0.4.ini
similarity index 61%
rename from .Slic3r/filament/Simple Mode.ini
rename to .Slic3r/filament/black pla 0.4.ini
index ffbb12f2..d5b9a404 100644
--- a/.Slic3r/filament/Simple Mode.ini	
+++ b/.Slic3r/filament/black pla 0.4.ini	
@@ -1,5 +1,5 @@
-# generated by Slic3r 1.1.6 on Sat Aug  2 20:10:57 2014
-bed_temperature = 60
+# generated by Slic3r 1.1.7 on Sun Aug 17 12:07:47 2014
+bed_temperature = 70
 bridge_fan_speed = 100
 cooling = 1
 disable_fan_first_layers = 1
@@ -7,10 +7,10 @@ extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 15
 filament_diameter = 1.75
-first_layer_bed_temperature = 60
-first_layer_temperature = 230
+first_layer_bed_temperature = 80
+first_layer_temperature = 210
 max_fan_speed = 100
 min_fan_speed = 55
 min_print_speed = 10
 slowdown_below_layer_time = 5
-temperature = 230
+temperature = 210
diff --git a/.Slic3r/filament/black pla.ini b/.Slic3r/filament/black pla 0.5.ini
similarity index 61%
rename from .Slic3r/filament/black pla.ini
rename to .Slic3r/filament/black pla 0.5.ini
index 76a8ddfd..dfc9cec7 100644
--- a/.Slic3r/filament/black pla.ini	
+++ b/.Slic3r/filament/black pla 0.5.ini	
@@ -1,5 +1,5 @@
-# generated by Slic3r 1.1.6 on Sun Aug  3 18:45:33 2014
-bed_temperature = 60
+# generated by Slic3r 1.1.7 on Sun Aug 17 11:01:37 2014
+bed_temperature = 70
 bridge_fan_speed = 100
 cooling = 1
 disable_fan_first_layers = 1
@@ -7,10 +7,10 @@ extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 15
 filament_diameter = 1.75
-first_layer_bed_temperature = 60
-first_layer_temperature = 235
+first_layer_bed_temperature = 70
+first_layer_temperature = 190
 max_fan_speed = 100
 min_fan_speed = 55
 min_print_speed = 10
 slowdown_below_layer_time = 5
-temperature = 235
+temperature = 190
diff --git a/.Slic3r/filament/fine purple pla.ini b/.Slic3r/filament/fine purple pla.ini
deleted file mode 100644
index 563c081b..00000000
--- a/.Slic3r/filament/fine purple pla.ini	
+++ /dev/null
@@ -1,16 +0,0 @@
-# generated by Slic3r 1.1.7 on Thu Aug  7 19:32:55 2014
-bed_temperature = 60
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 1
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 15
-filament_diameter = 1.75
-first_layer_bed_temperature = 60
-first_layer_temperature = 235
-max_fan_speed = 100
-min_fan_speed = 55
-min_print_speed = 10
-slowdown_below_layer_time = 5
-temperature = 235
diff --git a/.Slic3r/filament/purple pla.ini b/.Slic3r/filament/pink abs 0.5.ini
similarity index 54%
rename from .Slic3r/filament/purple pla.ini
rename to .Slic3r/filament/pink abs 0.5.ini
index fc72a4f0..e6c12717 100644
--- a/.Slic3r/filament/purple pla.ini	
+++ b/.Slic3r/filament/pink abs 0.5.ini	
@@ -1,16 +1,16 @@
-# generated by Slic3r 1.1.7 on Thu Aug  7 07:17:14 2014
-bed_temperature = 60
+# generated by Slic3r 1.1.7 on Sat Aug 16 14:20:52 2014
+bed_temperature = 90
 bridge_fan_speed = 100
 cooling = 1
 disable_fan_first_layers = 1
 extrusion_multiplier = 1
 fan_always_on = 0
-fan_below_layer_time = 15
+fan_below_layer_time = 60
 filament_diameter = 1.75
-first_layer_bed_temperature = 60
+first_layer_bed_temperature = 90
 first_layer_temperature = 235
 max_fan_speed = 100
-min_fan_speed = 55
+min_fan_speed = 60
 min_print_speed = 10
-slowdown_below_layer_time = 5
+slowdown_below_layer_time = 30
 temperature = 235
diff --git a/.Slic3r/filament/pink abs.ini b/.Slic3r/filament/pink abs.ini
deleted file mode 100644
index d53928f8..00000000
--- a/.Slic3r/filament/pink abs.ini	
+++ /dev/null
@@ -1,16 +0,0 @@
-# generated by Slic3r 1.1.7 on Sat Aug  9 08:50:38 2014
-bed_temperature = 85
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 1
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_diameter = 1.75
-first_layer_bed_temperature = 85
-first_layer_temperature = 240
-max_fan_speed = 100
-min_fan_speed = 60
-min_print_speed = 10
-slowdown_below_layer_time = 10
-temperature = 240
diff --git a/.Slic3r/print/Simple Mode.ini b/.Slic3r/print/coarse abs 0.5.ini
similarity index 70%
rename from .Slic3r/print/Simple Mode.ini
rename to .Slic3r/print/coarse abs 0.5.ini
index d09c146c..806e0174 100644
--- a/.Slic3r/print/Simple Mode.ini	
+++ b/.Slic3r/print/coarse abs 0.5.ini	
@@ -1,27 +1,27 @@
-# generated by Slic3r 1.1.6 on Sun Aug  3 10:31:57 2014
+# generated by Slic3r 1.1.7 on Sat Aug 16 14:32:30 2014
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
 bridge_flow_ratio = 1
-bridge_speed = 60
+bridge_speed = 15
 brim_width = 0
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
-external_perimeter_speed = 70%
-external_perimeters_first = 0
+external_perimeter_speed = 15
+external_perimeters_first = 1
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
-fill_density = 35%
-fill_pattern = honeycomb
+fill_density = 40%
+fill_pattern = rectilinear
 first_layer_acceleration = 0
 first_layer_extrusion_width = 200%
-first_layer_height = 0.4
-first_layer_speed = 45%
-gap_fill_speed = 20
+first_layer_height = 0.2
+first_layer_speed = 15
+gap_fill_speed = 15
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
@@ -29,10 +29,10 @@ infill_extruder = 1
 infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 1
-infill_speed = 60
+infill_speed = 12
 interface_shells = 0
 layer_height = 0.4
-min_skirt_length = 0
+min_skirt_length = 20
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
@@ -41,21 +41,21 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 30
+perimeter_speed = 15
 perimeters = 3
 post_process = 
 raft_layers = 0
 resolution = 0
-seam_position = aligned
+seam_position = random
 skirt_distance = 6
 skirt_height = 1
 skirts = 1
-small_perimeter_speed = 30
-solid_fill_pattern = hilbertcurve
+small_perimeter_speed = 15
+solid_fill_pattern = rectilinear
 solid_infill_below_area = 70
-solid_infill_every_layers = 5
+solid_infill_every_layers = 7
 solid_infill_extrusion_width = 0
-solid_infill_speed = 60
+solid_infill_speed = 12
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -66,14 +66,14 @@ support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_interface_layers = 3
 support_material_interface_spacing = 0
-support_material_interface_speed = 100%
+support_material_interface_speed = 15
 support_material_pattern = pillars
 support_material_spacing = 2.5
-support_material_speed = 60
+support_material_speed = 15
 support_material_threshold = 0
 thin_walls = 1
-threads = 2
+threads = 8
 top_infill_extrusion_width = 0
-top_solid_infill_speed = 50
-top_solid_layers = 3
-travel_speed = 130
+top_solid_infill_speed = 10
+top_solid_layers = 4
+travel_speed = 100
diff --git a/.Slic3r/print/fine0.4.ini b/.Slic3r/print/coarse pla 0.4.ini
similarity index 90%
rename from .Slic3r/print/fine0.4.ini
rename to .Slic3r/print/coarse pla 0.4.ini
index 8fdc26b9..367c8860 100644
--- a/.Slic3r/print/fine0.4.ini
+++ b/.Slic3r/print/coarse pla 0.4.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.1.7 on Sat Aug  9 08:03:40 2014
+# generated by Slic3r 1.1.7 on Sun Aug 17 11:50:25 2014
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 3
 bridge_acceleration = 0
@@ -15,11 +15,11 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
-fill_density = 40%
-fill_pattern = honeycomb
+fill_density = 35%
+fill_pattern = rectilinear
 first_layer_acceleration = 0
 first_layer_extrusion_width = 200%
-first_layer_height = 0.4
+first_layer_height = 0.3
 first_layer_speed = 45%
 gap_fill_speed = 20
 gcode_comments = 0
@@ -31,8 +31,8 @@ infill_first = 0
 infill_only_where_needed = 1
 infill_speed = 60
 interface_shells = 0
-layer_height = 0.2
-min_skirt_length = 50
+layer_height = 0.3
+min_skirt_length = 30
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
@@ -51,7 +51,7 @@ skirt_distance = 6
 skirt_height = 1
 skirts = 1
 small_perimeter_speed = 30
-solid_fill_pattern = hilbertcurve
+solid_fill_pattern = rectilinear
 solid_infill_below_area = 70
 solid_infill_every_layers = 5
 solid_infill_extrusion_width = 0
diff --git a/.Slic3r/print/coarse0.4.ini b/.Slic3r/print/coarse pla 0.5.ini
similarity index 97%
rename from .Slic3r/print/coarse0.4.ini
rename to .Slic3r/print/coarse pla 0.5.ini
index 6c962482..c30e229d 100644
--- a/.Slic3r/print/coarse0.4.ini
+++ b/.Slic3r/print/coarse pla 0.5.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.1.6 on Sun Aug  3 13:20:02 2014
+# generated by Slic3r 1.1.7 on Sun Aug 17 10:21:49 2014
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 3
 bridge_acceleration = 0
diff --git a/.Slic3r/print/fine0.5 abs.ini b/.Slic3r/print/fine abs 0.5.ini
similarity index 80%
rename from .Slic3r/print/fine0.5 abs.ini
rename to .Slic3r/print/fine abs 0.5.ini
index 204e3b32..ab2933b7 100644
--- a/.Slic3r/print/fine0.5 abs.ini	
+++ b/.Slic3r/print/fine abs 0.5.ini	
@@ -1,14 +1,14 @@
-# generated by Slic3r 1.1.7 on Sun Aug 10 11:56:49 2014
+# generated by Slic3r 1.1.7 on Sat Aug 16 14:16:18 2014
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 3
 bridge_acceleration = 0
 bridge_flow_ratio = 1
-bridge_speed = 30
+bridge_speed = 15
 brim_width = 0
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
-external_perimeter_speed = 70%
+external_perimeter_speed = 15
 external_perimeters_first = 1
 extra_perimeters = 1
 extruder_clearance_height = 20
@@ -19,9 +19,9 @@ fill_density = 40%
 fill_pattern = honeycomb
 first_layer_acceleration = 0
 first_layer_extrusion_width = 200%
-first_layer_height = 0.35
-first_layer_speed = 45%
-gap_fill_speed = 20
+first_layer_height = 0.2
+first_layer_speed = 15
+gap_fill_speed = 15
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
@@ -29,10 +29,10 @@ infill_extruder = 1
 infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 1
-infill_speed = 30
+infill_speed = 12
 interface_shells = 0
 layer_height = 0.2
-min_skirt_length = 50
+min_skirt_length = 20
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
@@ -41,7 +41,7 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 30
+perimeter_speed = 15
 perimeters = 3
 post_process = 
 raft_layers = 0
@@ -50,12 +50,12 @@ seam_position = random
 skirt_distance = 6
 skirt_height = 1
 skirts = 1
-small_perimeter_speed = 30
+small_perimeter_speed = 15
 solid_fill_pattern = hilbertcurve
 solid_infill_below_area = 70
 solid_infill_every_layers = 5
 solid_infill_extrusion_width = 0
-solid_infill_speed = 30
+solid_infill_speed = 12
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -66,14 +66,14 @@ support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_interface_layers = 3
 support_material_interface_spacing = 0
-support_material_interface_speed = 100%
+support_material_interface_speed = 15
 support_material_pattern = pillars
 support_material_spacing = 2.5
-support_material_speed = 30
+support_material_speed = 15
 support_material_threshold = 0
 thin_walls = 1
 threads = 8
 top_infill_extrusion_width = 0
-top_solid_infill_speed = 30
+top_solid_infill_speed = 10
 top_solid_layers = 4
-travel_speed = 130
+travel_speed = 100
diff --git a/.Slic3r/printer/Simple Mode.ini b/.Slic3r/printer/Simple Mode.ini
deleted file mode 100644
index c55bba68..00000000
--- a/.Slic3r/printer/Simple Mode.ini	
+++ /dev/null
@@ -1,23 +0,0 @@
-# generated by Slic3r 1.1.6 on Sat Aug  2 20:52:03 2014
-bed_size = 170,170
-end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
-extruder_offset = 0x0
-gcode_flavor = reprap
-layer_gcode = 
-nozzle_diameter = 0.4
-print_center = 85,85
-retract_before_travel = 2
-retract_layer_change = 1
-retract_length = 2
-retract_length_toolchange = 10
-retract_lift = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 30
-start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-vibration_limit = 0
-wipe = 0
-z_offset = 0
diff --git a/.Slic3r/printer/printer.ini b/.Slic3r/printer/printer 0.4.ini
similarity index 88%
rename from .Slic3r/printer/printer.ini
rename to .Slic3r/printer/printer 0.4.ini
index bdadaebb..d51bf96a 100644
--- a/.Slic3r/printer/printer.ini
+++ b/.Slic3r/printer/printer 0.4.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.1.6 on Sun Aug  3 13:18:19 2014
+# generated by Slic3r 1.1.7 on Sun Aug 17 11:02:28 2014
 bed_size = 170,170
 end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
 extruder_offset = 0x0
@@ -13,7 +13,7 @@ retract_length_toolchange = 10
 retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 30
+retract_speed = 40
 start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
 toolchange_gcode = 
 use_firmware_retraction = 0
diff --git a/.Slic3r/printer/printer0.5.ini b/.Slic3r/printer/printer 0.5.ini
similarity index 91%
rename from .Slic3r/printer/printer0.5.ini
rename to .Slic3r/printer/printer 0.5.ini
index 9921db61..a2e43543 100644
--- a/.Slic3r/printer/printer0.5.ini
+++ b/.Slic3r/printer/printer 0.5.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.1.7 on Sun Aug 10 11:56:06 2014
+# generated by Slic3r 1.1.7 on Sun Aug 17 10:22:06 2014
 bed_size = 170,170
 end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
 extruder_offset = 0x0
diff --git a/.Slic3r/slic3r.ini b/.Slic3r/slic3r.ini
index 614fede3..db79f41b 100644
--- a/.Slic3r/slic3r.ini
+++ b/.Slic3r/slic3r.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.1.7 on Sun Aug 10 11:56:56 2014
+# generated by Slic3r 1.1.7 on Sun Aug 17 12:07:47 2014
 autocenter = 1
 last_output_path = /home/cyryl/RepRap/models
 last_version_check = 1407388369
@@ -8,9 +8,9 @@ version = 1.1.7
 version_check = 1
 
 [presets]
-filament = pink abs.ini
-print = fine0.5 abs.ini
-printer = printer0.5.ini
+filament = black pla 0.4.ini
+print = coarse pla 0.4.ini
+printer = printer 0.4.ini
 
 [recent]
-skein_directory = /home/cyryl/Downloads
+skein_directory = /home/cyryl/RepRap/models/PrusaMendel/metric-prusa-lm8uu
diff --git a/.config/terminator/config b/.config/terminator/config
index 091496c4..7bd67a8b 100644
--- a/.config/terminator/config
+++ b/.config/terminator/config
@@ -5,6 +5,7 @@
 [profiles]
   [[default]]
     palette = "#073642:#dc322f:#859900:#b58900:#268bd2:#d33682:#2aa198:#eee8d5:#002b36:#cb4b16:#586e75:#657b83:#839496:#6c71c4:#93a1a1:#fdf6e3"
+    login_shell = True
     background_darkness = 0.95
     background_type = transparent
     use_system_font = False
diff --git a/.oh-my-zsh b/.oh-my-zsh
index 1b7a3ea9..23bbf3cc 160000
--- a/.oh-my-zsh
+++ b/.oh-my-zsh
@@ -1 +1 @@
-Subproject commit 1b7a3ea99a8b566510ab7881063148c43be6b98d
+Subproject commit 23bbf3cc2bffb059506b7995e34cd451dc0a947a
diff --git a/install_common.sh b/install_common.sh
new file mode 100755
index 00000000..d8d7d424
--- /dev/null
+++ b/install_common.sh
@@ -0,0 +1,46 @@
+#!/bin/bash
+
+#zsh
+sudo chsh -s `which zsh` $USER 
+
+#submodules
+DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+cd $DIR
+git submodule init
+git submodule update --recursive
+
+#rvm
+curl -sSL https://get.rvm.io | bash -s stable
+source $HOME/.rvm/scripts/rvm
+rvm install ruby
+
+#symbolic links
+ln -s "$DIR/.vim" ~/.
+ln -s "$DIR/.vimrc" ~/.
+ln -s "$DIR/.tmux.conf" ~/.
+rm -f "~/.zshrc"
+ln -s "$DIR/.zshrc" ~/.
+ln -s "$DIR/.oh-my-zsh" ~/.
+ln -s "$DIR/.Slic3r" ~/.
+ln -s "$DIR/.gitconfig.linux.private" ~/.gitconfig
+ln -s "$DIR/tools" ~/
+
+#install fonts
+mkdir ~/.fonts
+cp -rv "$DIR/fonts" ~/.fonts
+fc-cache
+
+
+#set solarized scheme
+$DIR/gnome-terminal-colors-solarized/install.sh
+
+#setting colors to solarized should result in the default proile with the following id set
+#TODO: choose the profile dynamically
+dconf write /org/gnome/terminal/legacy/profiles:/:b1dcc9dd-5262-4d8d-a863-c897e6d979b9/font "'Inconsolata for Powerline Medium 18'"
+dconf write /org/gnome/terminal/legacy/profiles:/:b1dcc9dd-5262-4d8d-a863-c897e6d979b9/login-shell true
+dconf write /org/gnome/terminal/legacy/profiles:/:b1dcc9dd-5262-4d8d-a863-c897e6d979b9/audible-bell false
+dconf write /org/gnome/terminal/legacy/profiles:/:b1dcc9dd-5262-4d8d-a863-c897e6d979b9/use-system-font false
+
+echo
+echo "now go ahead and restart Gnome session"
+
diff --git a/install_fedora.sh b/install_fedora.sh
index 31329187..82f78cbf 100755
--- a/install_fedora.sh
+++ b/install_fedora.sh
@@ -4,46 +4,24 @@
 FEDORA_VERSION=`rpm -E %fedora`
 sudo yum install http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$FEDORA_VERSION.noarch.rpm
 sudo yum install http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$FEDORA_VERSION.noarch.rpm
-sudo yum install vim tmux atop zsh thunderbird thunderbird-enigmail thunderbird-lightning firefox aria2 gajim lm_sensors vlc freecad
-sudo chsh -s `which zsh` $USER 
-#fetch dependencies
+sudo yum install vim tmux atop zsh thunderbird thunderbird-enigmail thunderbird-lightning firefox aria2 gajim lm_sensors vlc freecad python3-pip qt5-qtbase-devel qt5-qtwebkit-devel 
+
+#ReText
+aria2c http://sourceforge.net/projects/pyqt/files/sip/sip-4.16.2/sip-4.16.2.tar.gz -d /tmp
+tar -C /tmp -xf /tmp/sip-4.16.2.tar.gz
+cd /tmp/sip-4.16.2
+python3 configure.py
+make
+sudo make install
+aria2c http://sourceforge.net/projects/pyqt/files/PyQt5/PyQt-5.3.1/PyQt-gpl-5.3.1.tar.gz -d /tmp
+tar -C /tmp -xf /tmp/PyQt-gpl-5.3.1.tar.gz
+cd /tmp/PyQt-gpl-5.3.1
+python3 configure.py --qmake /usr/bin/qmake-qt5
+make -j8
+sudo make install
+
+sudo pip-python3 install retext
 
 DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-cd $DIR
-git submodule init
-git submodule update --recursive
-
-#rvm
-curl -sSL https://get.rvm.io | bash -s stable
-rvm install ruby
-
-#symbolic links
-ln -s "$DIR/.vim" ~/.
-ln -s "$DIR/.vimrc" ~/.
-ln -s "$DIR/.tmux.conf" ~/.
-rm -f "$DIR/.zshrc"
-ln -s "$DIR/.zshrc" ~/.
-ln -s "$DIR/.oh-my-zsh" ~/.
-ln -s "$DIR/.Slic3r" ~/.
-ln -s "$DIR/.gitconfig.linux.private" ~/.gitconfig
-ln -s "$DIR/tools" ~/
-
-#install fonts
-mkdir ~/.fonts
-cp -rv "$DIR/fonts" ~/.fonts
-fc-cache
-
-
-#set solarized scheme
-$DIR/gnome-terminal-colors-solarized/install.sh
-
-#setting colors to solarized should result in the default proile with the following id set
-#TODO: choose the profile dynamically
-dconf write /org/gnome/terminal/legacy/profiles:/:b1dcc9dd-5262-4d8d-a863-c897e6d979b9/font "'Inconsolata for Powerline Medium 18'"
-dconf write /org/gnome/terminal/legacy/profiles:/:b1dcc9dd-5262-4d8d-a863-c897e6d979b9/login-shell true
-dconf write /org/gnome/terminal/legacy/profiles:/:b1dcc9dd-5262-4d8d-a863-c897e6d979b9/audible-bell false
-dconf write /org/gnome/terminal/legacy/profiles:/:b1dcc9dd-5262-4d8d-a863-c897e6d979b9/use-system-font false
-
-echo
-echo "now go ahead and restart Gnome session"
+$DIR/install_common.sh
 
diff --git a/install_ubuntu.sh b/install_ubuntu.sh
new file mode 100644
index 00000000..e168acbe
--- /dev/null
+++ b/install_ubuntu.sh
@@ -0,0 +1,5 @@
+#!/bin/bash
+sudo apt-get update
+sudo apt-get dist-ugprade
+sudo apt-get install meld
+