dotfiles/.Slic3r/print/fine abs 0.5.ini
2014-08-16 14:21:33 +02:00

79 lines
2 KiB
INI

# generated by Slic3r 1.1.7 on Sat Aug 16 14:16:18 2014
avoid_crossing_perimeters = 1
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 15
brim_width = 0
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_perimeter_speed = 15
external_perimeters_first = 1
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 40%
fill_pattern = honeycomb
first_layer_acceleration = 0
first_layer_extrusion_width = 200%
first_layer_height = 0.2
first_layer_speed = 15
gap_fill_speed = 15
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 1
infill_speed = 12
interface_shells = 0
layer_height = 0.2
min_skirt_length = 20
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 15
perimeters = 3
post_process =
raft_layers = 0
resolution = 0
seam_position = random
skirt_distance = 6
skirt_height = 1
skirts = 1
small_perimeter_speed = 15
solid_fill_pattern = hilbertcurve
solid_infill_below_area = 70
solid_infill_every_layers = 5
solid_infill_extrusion_width = 0
solid_infill_speed = 12
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 15
support_material_pattern = pillars
support_material_spacing = 2.5
support_material_speed = 15
support_material_threshold = 0
thin_walls = 1
threads = 8
top_infill_extrusion_width = 0
top_solid_infill_speed = 10
top_solid_layers = 4
travel_speed = 100