trying 0.5 nozzle for pink abs

.Slic3r/print/fine0.4 abs.ini

@@ -0,0 +1,79 @@
+# generated by Slic3r 1.1.7 on Sun Aug 10 10:56:11 2014
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 30
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_speed = 70%
+external_perimeters_first = 1
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0
+fill_angle = 45
+fill_density = 40%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.4
+first_layer_speed = 45%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 1
+infill_speed = 30
+interface_shells = 0
+layer_height = 0.2
+min_skirt_length = 50
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = random
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 30
+solid_fill_pattern = hilbertcurve
+solid_infill_below_area = 70
+solid_infill_every_layers = 5
+solid_infill_extrusion_width = 0
+solid_infill_speed = 30
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = pillars
+support_material_spacing = 2.5
+support_material_speed = 30
+support_material_threshold = 0
+thin_walls = 1
+threads = 8
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 30
+top_solid_layers = 4
+travel_speed = 130

.Slic3r/print/fine0.5 abs.ini

@@ -0,0 +1,79 @@
+# generated by Slic3r 1.1.7 on Sun Aug 10 11:56:49 2014
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 30
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_speed = 70%
+external_perimeters_first = 1
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0
+fill_angle = 45
+fill_density = 40%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.35
+first_layer_speed = 45%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 1
+infill_speed = 30
+interface_shells = 0
+layer_height = 0.2
+min_skirt_length = 50
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = random
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 30
+solid_fill_pattern = hilbertcurve
+solid_infill_below_area = 70
+solid_infill_every_layers = 5
+solid_infill_extrusion_width = 0
+solid_infill_speed = 30
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = pillars
+support_material_spacing = 2.5
+support_material_speed = 30
+support_material_threshold = 0
+thin_walls = 1
+threads = 8
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 30
+top_solid_layers = 4
+travel_speed = 130

.Slic3r/printer/printer0.5.ini

@@ -0,0 +1,23 @@
+# generated by Slic3r 1.1.7 on Sun Aug 10 11:56:06 2014
+bed_size = 170,170
+end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.5
+print_center = 85,85
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 3
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0

.Slic3r/slic3r.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r 1.1.7 on Sat Aug  9 08:50:42 2014
+# generated by Slic3r 1.1.7 on Sun Aug 10 11:56:56 2014
 autocenter = 1
 last_output_path = /home/cyryl/RepRap/models
 last_version_check = 1407388369
@@ -9,8 +9,8 @@ version_check = 1
 
 [presets]
 filament = pink abs.ini
-print = fine0.4.ini
-printer = printer.ini
+print = fine0.5 abs.ini
+printer = printer0.5.ini
 
 [recent]
 skein_directory = /home/cyryl/Downloads