From d1db8900559c8878738a5a2caf8fb7567713cef2 Mon Sep 17 00:00:00 2001
From: Cyryl Plotnicki-Chudyk <cyplo@cyplo.net>
Date: Sat, 11 Oct 2014 13:23:35 +0200
Subject: [PATCH] removed obsoletely named pink abs config file

---
 .Slic3r/print/fine0.4 abs.ini | 79 -----------------------------------
 1 file changed, 79 deletions(-)
 delete mode 100644 .Slic3r/print/fine0.4 abs.ini

diff --git a/.Slic3r/print/fine0.4 abs.ini b/.Slic3r/print/fine0.4 abs.ini
deleted file mode 100644
index ef0c89fa..00000000
--- a/.Slic3r/print/fine0.4 abs.ini	
+++ /dev/null
@@ -1,79 +0,0 @@
-# generated by Slic3r 1.1.7 on Sun Aug 10 10:56:11 2014
-avoid_crossing_perimeters = 1
-bottom_solid_layers = 3
-bridge_acceleration = 0
-bridge_flow_ratio = 1
-bridge_speed = 30
-brim_width = 0
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-external_perimeter_speed = 70%
-external_perimeters_first = 1
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0
-fill_angle = 45
-fill_density = 40%
-fill_pattern = honeycomb
-first_layer_acceleration = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.4
-first_layer_speed = 45%
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 1
-infill_speed = 30
-interface_shells = 0
-layer_height = 0.2
-min_skirt_length = 50
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 30
-perimeters = 3
-post_process = 
-raft_layers = 0
-resolution = 0
-seam_position = random
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-small_perimeter_speed = 30
-solid_fill_pattern = hilbertcurve
-solid_infill_below_area = 70
-solid_infill_every_layers = 5
-solid_infill_extrusion_width = 0
-solid_infill_speed = 30
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = pillars
-support_material_spacing = 2.5
-support_material_speed = 30
-support_material_threshold = 0
-thin_walls = 1
-threads = 8
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 30
-top_solid_layers = 4
-travel_speed = 130