cleanup - remove slicer files

.Slic3r/filament/pink abs 0.4.ini

@@ -1,16 +0,0 @@
-# generated by Slic3r 1.2.1-dev on Sat Oct 25 09:47:11 2014
-bed_temperature = 70
-bridge_fan_speed = 100
-cooling = 0
-disable_fan_first_layers = 1
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_diameter = 1.75
-first_layer_bed_temperature = 60
-first_layer_temperature = 235
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 2
-slowdown_below_layer_time = 30
-temperature = 235

.Slic3r/print/coarse abs 0.4.ini

@@ -1,81 +0,0 @@
-# generated by Slic3r 1.2.1-dev on Thu Oct 30 18:49:14 2014
-avoid_crossing_perimeters = 1
-bottom_solid_layers = 1
-bridge_acceleration = 0
-bridge_flow_ratio = 1
-bridge_speed = 20
-brim_width = 0
-complete_objects = 0
-default_acceleration = 1500
-dont_support_bridges = 1
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 25
-external_perimeters_first = 1
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0
-fill_angle = 45
-fill_density = 30%
-fill_pattern = honeycomb
-first_layer_acceleration = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.2
-first_layer_speed = 90%
-gap_fill_speed = 10
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 1
-infill_speed = 20
-interface_shells = 0
-layer_height = 0.2
-min_skirt_length = 20
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 1
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 20
-perimeters = 3
-post_process = 
-raft_layers = 0
-resolution = 0
-seam_position = random
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-small_perimeter_speed = 15
-solid_fill_pattern = rectilinear
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extrusion_width = 0
-solid_infill_speed = 20
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 20
-support_material_pattern = pillars
-support_material_spacing = 2.5
-support_material_speed = 20
-support_material_threshold = 0
-thin_walls = 1
-threads = 8
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
-top_solid_layers = 3
-travel_speed = 50
-xy_size_compensation = 0

.Slic3r/print/fine abs 0.4.ini

@@ -1,81 +0,0 @@
-# generated by Slic3r 1.2.1-dev on Thu Oct 30 20:51:15 2014
-avoid_crossing_perimeters = 1
-bottom_solid_layers = 1
-bridge_acceleration = 0
-bridge_flow_ratio = 1
-bridge_speed = 20
-brim_width = 0
-complete_objects = 0
-default_acceleration = 1500
-dont_support_bridges = 1
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 25
-external_perimeters_first = 1
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0
-fill_angle = 45
-fill_density = 40%
-fill_pattern = honeycomb
-first_layer_acceleration = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.3
-first_layer_speed = 90%
-gap_fill_speed = 10
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 1
-infill_speed = 20
-interface_shells = 0
-layer_height = 0.1
-min_skirt_length = 20
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 1
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 20
-perimeters = 3
-post_process = 
-raft_layers = 0
-resolution = 0
-seam_position = random
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-small_perimeter_speed = 15
-solid_fill_pattern = rectilinear
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extrusion_width = 0
-solid_infill_speed = 20
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 20
-support_material_pattern = pillars
-support_material_spacing = 2.5
-support_material_speed = 20
-support_material_threshold = 0
-thin_walls = 1
-threads = 8
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
-top_solid_layers = 3
-travel_speed = 50
-xy_size_compensation = 0

.Slic3r/printer/printer 0.4.ini

@@ -1,22 +0,0 @@
-# generated by Slic3r 1.2.1-dev on Thu Oct 23 19:19:38 2014
-bed_shape = 0x0,180x0,180x180,0x180
-end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
-extruder_offset = 0x0
-gcode_flavor = reprap
-layer_gcode = 
-nozzle_diameter = 0.4
-retract_before_travel = 5
-retract_layer_change = 1
-retract_length = 1
-retract_length_toolchange = 10
-retract_lift = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 40
-start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-vibration_limit = 0
-wipe = 1
-z_offset = 0

.Slic3r/simple.ini

@@ -1,120 +0,0 @@
-# generated by Slic3r 1.1.6 on Sat Aug  2 20:09:23 2014
-avoid_crossing_perimeters = 1
-bed_size = 200,200
-bed_temperature = 60
-bottom_solid_layers = 3
-bridge_acceleration = 0
-bridge_fan_speed = 100
-bridge_flow_ratio = 1
-bridge_speed = 60
-brim_width = 0
-complete_objects = 0
-cooling = 1
-default_acceleration = 0
-disable_fan_first_layers = 1
-dont_support_bridges = 1
-duplicate_distance = 6
-end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
-external_perimeter_speed = 70%
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extruder_offset = 0x0
-extrusion_axis = E
-extrusion_multiplier = 1
-extrusion_width = 0
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_diameter = 1.75
-fill_angle = 45
-fill_density = 40%
-fill_pattern = honeycomb
-first_layer_acceleration = 0
-first_layer_bed_temperature = 60
-first_layer_extrusion_width = 200%
-first_layer_height = 0.4
-first_layer_speed = 30%
-first_layer_temperature = 230
-g0 = 0
-gap_fill_speed = 20
-gcode_arcs = 0
-gcode_comments = 0
-gcode_flavor = reprap
-infill_acceleration = 0
-infill_every_layers = 10
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_speed = 60
-interface_shells = 0
-layer_gcode = 
-layer_height = 0.3
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 10
-min_skirt_length = 0
-notes = 
-nozzle_diameter = 0.4
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 30
-perimeters = 3
-post_process = 
-print_center = 100,100
-raft_layers = 0
-resolution = 0
-retract_before_travel = 2
-retract_layer_change = 1
-retract_length = 2
-retract_length_toolchange = 10
-retract_lift = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 30
-seam_position = aligned
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-slowdown_below_layer_time = 30
-small_perimeter_speed = 30
-solid_fill_pattern = rectilinear
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extrusion_width = 0
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
-support_material = 0
-support_material_angle = 0
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = pillars
-support_material_spacing = 2.5
-support_material_speed = 60
-support_material_threshold = 0
-temperature = 230
-thin_walls = 1
-threads = 2
-toolchange_gcode = 
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 50
-top_solid_layers = 3
-travel_speed = 130
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-vibration_limit = 0
-wipe = 0
-z_offset = 0

.Slic3r/slic3r.ini

@@ -1,20 +0,0 @@
-# generated by Slic3r 1.2.5 on Fri Jan 16 21:23:18 2015
-autocenter = 1
-background_processing = 1
-last_output_path = /home/cyryl/reprap/gcode
-last_version_check = 1407388369
-main_frame_maximized = 1
-main_frame_pos = 0,27
-main_frame_size = 1920,1053
-mode = expert
-remember_output_path = 1
-version = 1.2.5
-version_check = 1
-
-[presets]
-filament = pink abs 0.4.ini
-print = fine abs 0.4.ini
-printer = printer 0.4.ini
-
-[recent]
-skein_directory = /home/cyryl/reprap/STLs