diff --git a/.Slic3r/filament/pink abs 0.4.ini b/.Slic3r/filament/pink abs 0.4.ini
index fc6d2d9f..faed1203 100644
--- a/.Slic3r/filament/pink abs 0.4.ini	
+++ b/.Slic3r/filament/pink abs 0.4.ini	
@@ -1,9 +1,9 @@
-# generated by Slic3r 1.2.1-dev on Thu Oct 23 20:20:44 2014
+# generated by Slic3r 1.2.1-dev on Thu Oct 23 20:34:24 2014
 bed_temperature = 70
 bridge_fan_speed = 100
 cooling = 0
 disable_fan_first_layers = 1
-extrusion_multiplier = 0.94
+extrusion_multiplier = 0.935
 fan_always_on = 1
 fan_below_layer_time = 60
 filament_diameter = 1.75
diff --git a/.Slic3r/print/fine abs 0.4.ini b/.Slic3r/print/fine abs 0.4.ini
index b30879b7..c25f63a5 100644
--- a/.Slic3r/print/fine abs 0.4.ini	
+++ b/.Slic3r/print/fine abs 0.4.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.1-dev on Thu Oct 23 19:55:11 2014
+# generated by Slic3r 1.2.1-dev on Thu Oct 23 20:34:34 2014
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 1
 bridge_acceleration = 0
@@ -16,7 +16,7 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
-fill_density = 40%
+fill_density = 35%
 fill_pattern = 3dhoneycomb
 first_layer_acceleration = 0
 first_layer_extrusion_width = 200%
diff --git a/.Slic3r/slic3r.ini b/.Slic3r/slic3r.ini
index 39ddd4bc..1bb5a1e8 100644
--- a/.Slic3r/slic3r.ini
+++ b/.Slic3r/slic3r.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.1-dev on Thu Oct 23 20:20:44 2014
+# generated by Slic3r 1.2.1-dev on Thu Oct 23 21:37:26 2014
 autocenter = 1
 background_processing = 1
 last_output_path = /home/cyryl/reprap/models/gcode