From c7c71e0a50c1b60e9a11b1b79005c040f7edd3d7 Mon Sep 17 00:00:00 2001 From: Cyryl Plotnicki-Chudyk Date: Sat, 11 Oct 2014 17:41:49 +0200 Subject: [PATCH] gajim in default ubuntu install ; added coarse pink abs slic3r setting --- .Slic3r/print/coarse abs 0.4.ini | 81 ++++++++++++++++++++++++++++++++ .Slic3r/print/fine abs 0.4.ini | 18 +++---- .Slic3r/slic3r.ini | 4 +- install_ubuntu.sh | 2 +- 4 files changed, 93 insertions(+), 12 deletions(-) create mode 100644 .Slic3r/print/coarse abs 0.4.ini diff --git a/.Slic3r/print/coarse abs 0.4.ini b/.Slic3r/print/coarse abs 0.4.ini new file mode 100644 index 00000000..fd2ff914 --- /dev/null +++ b/.Slic3r/print/coarse abs 0.4.ini @@ -0,0 +1,81 @@ +# generated by Slic3r 1.2.0 on Sat Oct 11 17:20:12 2014 +avoid_crossing_perimeters = 1 +bottom_solid_layers = 3 +bridge_acceleration = 0 +bridge_flow_ratio = 1 +bridge_speed = 20 +brim_width = 0 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +external_perimeter_extrusion_width = 0 +external_perimeter_speed = 70% +external_perimeters_first = 1 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0 +fill_angle = 45 +fill_density = 40% +fill_pattern = honeycomb +first_layer_acceleration = 0 +first_layer_extrusion_width = 200% +first_layer_height = 0.3 +first_layer_speed = 80% +gap_fill_speed = 10 +gcode_comments = 0 +infill_acceleration = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 1 +infill_speed = 45 +interface_shells = 0 +layer_height = 0.33 +min_skirt_length = 20 +notes = +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 15 +perimeters = 3 +post_process = +raft_layers = 0 +resolution = 0 +seam_position = random +skirt_distance = 6 +skirt_height = 1 +skirts = 1 +small_perimeter_speed = 15 +solid_fill_pattern = rectilinear +solid_infill_below_area = 70 +solid_infill_every_layers = 7 +solid_infill_extrusion_width = 0 +solid_infill_speed = 20 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = pillars +support_material_spacing = 2.5 +support_material_speed = 20 +support_material_threshold = 0 +thin_walls = 1 +threads = 8 +top_infill_extrusion_width = 0 +top_solid_infill_speed = 20 +top_solid_layers = 3 +travel_speed = 50 +xy_size_compensation = 0 diff --git a/.Slic3r/print/fine abs 0.4.ini b/.Slic3r/print/fine abs 0.4.ini index 5053e20d..2ed252d7 100644 --- a/.Slic3r/print/fine abs 0.4.ini +++ b/.Slic3r/print/fine abs 0.4.ini @@ -1,12 +1,12 @@ -# generated by Slic3r 1.2.0 on Sat Oct 11 13:19:30 2014 +# generated by Slic3r 1.2.0 on Sat Oct 11 15:14:10 2014 avoid_crossing_perimeters = 1 bottom_solid_layers = 3 bridge_acceleration = 0 bridge_flow_ratio = 1 -bridge_speed = 60 +bridge_speed = 20 brim_width = 0 complete_objects = 0 -default_acceleration = 0 +default_acceleration = 1000 dont_support_bridges = 1 external_perimeter_extrusion_width = 0 external_perimeter_speed = 70% @@ -21,7 +21,7 @@ fill_pattern = honeycomb first_layer_acceleration = 0 first_layer_extrusion_width = 200% first_layer_height = 0.3 -first_layer_speed = 50% +first_layer_speed = 80% gap_fill_speed = 10 gcode_comments = 0 infill_acceleration = 0 @@ -30,7 +30,7 @@ infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 1 -infill_speed = 30 +infill_speed = 45 interface_shells = 0 layer_height = 0.2 min_skirt_length = 20 @@ -56,7 +56,7 @@ solid_fill_pattern = rectilinear solid_infill_below_area = 70 solid_infill_every_layers = 7 solid_infill_extrusion_width = 0 -solid_infill_speed = 10 +solid_infill_speed = 20 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 @@ -70,12 +70,12 @@ support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = pillars support_material_spacing = 2.5 -support_material_speed = 60 +support_material_speed = 20 support_material_threshold = 0 thin_walls = 1 threads = 8 top_infill_extrusion_width = 0 -top_solid_infill_speed = 50 +top_solid_infill_speed = 20 top_solid_layers = 3 -travel_speed = 100 +travel_speed = 50 xy_size_compensation = 0 diff --git a/.Slic3r/slic3r.ini b/.Slic3r/slic3r.ini index d8eb902c..446dea51 100644 --- a/.Slic3r/slic3r.ini +++ b/.Slic3r/slic3r.ini @@ -1,4 +1,4 @@ -# generated by Slic3r 1.2.0 on Sat Oct 11 13:19:40 2014 +# generated by Slic3r 1.2.0 on Sat Oct 11 17:22:27 2014 autocenter = 1 background_processing = 1 last_output_path = /run/user/1000/gvfs/sftp:host=192.168.1.152,user=pi/mnt/storage/home/pi/storage/files/reprap/gcode @@ -10,7 +10,7 @@ version_check = 1 [presets] filament = pink abs 0.4.ini -print = fine abs 0.4.ini +print = coarse abs 0.4.ini printer = printer 0.4.ini [recent] diff --git a/install_ubuntu.sh b/install_ubuntu.sh index e3431076..9ced999e 100755 --- a/install_ubuntu.sh +++ b/install_ubuntu.sh @@ -1,7 +1,7 @@ #!/bin/bash sudo apt-get update sudo apt-get dist-ugprade -sudo apt-get install meld whois zsh tmux vim atop aria2 curl pv pixz +sudo apt-get install meld whois zsh tmux vim atop aria2 curl pv pixz gajim DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )" $DIR/install_common.sh