diff --git a/.Slic3r/print/coarse abs 0.4.ini b/.Slic3r/print/coarse abs 0.4.ini
new file mode 100644
index 00000000..fd2ff914
--- /dev/null
+++ b/.Slic3r/print/coarse abs 0.4.ini	
@@ -0,0 +1,81 @@
+# generated by Slic3r 1.2.0 on Sat Oct 11 17:20:12 2014
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 20
+brim_width = 0
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 70%
+external_perimeters_first = 1
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0
+fill_angle = 45
+fill_density = 40%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.3
+first_layer_speed = 80%
+gap_fill_speed = 10
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 1
+infill_speed = 45
+interface_shells = 0
+layer_height = 0.33
+min_skirt_length = 20
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 15
+perimeters = 3
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = random
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 15
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 70
+solid_infill_every_layers = 7
+solid_infill_extrusion_width = 0
+solid_infill_speed = 20
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = pillars
+support_material_spacing = 2.5
+support_material_speed = 20
+support_material_threshold = 0
+thin_walls = 1
+threads = 8
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 3
+travel_speed = 50
+xy_size_compensation = 0
diff --git a/.Slic3r/print/fine abs 0.4.ini b/.Slic3r/print/fine abs 0.4.ini
index 5053e20d..2ed252d7 100644
--- a/.Slic3r/print/fine abs 0.4.ini	
+++ b/.Slic3r/print/fine abs 0.4.ini	
@@ -1,12 +1,12 @@
-# generated by Slic3r 1.2.0 on Sat Oct 11 13:19:30 2014
+# generated by Slic3r 1.2.0 on Sat Oct 11 15:14:10 2014
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 3
 bridge_acceleration = 0
 bridge_flow_ratio = 1
-bridge_speed = 60
+bridge_speed = 20
 brim_width = 0
 complete_objects = 0
-default_acceleration = 0
+default_acceleration = 1000
 dont_support_bridges = 1
 external_perimeter_extrusion_width = 0
 external_perimeter_speed = 70%
@@ -21,7 +21,7 @@ fill_pattern = honeycomb
 first_layer_acceleration = 0
 first_layer_extrusion_width = 200%
 first_layer_height = 0.3
-first_layer_speed = 50%
+first_layer_speed = 80%
 gap_fill_speed = 10
 gcode_comments = 0
 infill_acceleration = 0
@@ -30,7 +30,7 @@ infill_extruder = 1
 infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 1
-infill_speed = 30
+infill_speed = 45
 interface_shells = 0
 layer_height = 0.2
 min_skirt_length = 20
@@ -56,7 +56,7 @@ solid_fill_pattern = rectilinear
 solid_infill_below_area = 70
 solid_infill_every_layers = 7
 solid_infill_extrusion_width = 0
-solid_infill_speed = 10
+solid_infill_speed = 20
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -70,12 +70,12 @@ support_material_interface_spacing = 0
 support_material_interface_speed = 100%
 support_material_pattern = pillars
 support_material_spacing = 2.5
-support_material_speed = 60
+support_material_speed = 20
 support_material_threshold = 0
 thin_walls = 1
 threads = 8
 top_infill_extrusion_width = 0
-top_solid_infill_speed = 50
+top_solid_infill_speed = 20
 top_solid_layers = 3
-travel_speed = 100
+travel_speed = 50
 xy_size_compensation = 0
diff --git a/.Slic3r/slic3r.ini b/.Slic3r/slic3r.ini
index d8eb902c..446dea51 100644
--- a/.Slic3r/slic3r.ini
+++ b/.Slic3r/slic3r.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.0 on Sat Oct 11 13:19:40 2014
+# generated by Slic3r 1.2.0 on Sat Oct 11 17:22:27 2014
 autocenter = 1
 background_processing = 1
 last_output_path = /run/user/1000/gvfs/sftp:host=192.168.1.152,user=pi/mnt/storage/home/pi/storage/files/reprap/gcode
@@ -10,7 +10,7 @@ version_check = 1
 
 [presets]
 filament = pink abs 0.4.ini
-print = fine abs 0.4.ini
+print = coarse abs 0.4.ini
 printer = printer 0.4.ini
 
 [recent]
diff --git a/install_ubuntu.sh b/install_ubuntu.sh
index e3431076..9ced999e 100755
--- a/install_ubuntu.sh
+++ b/install_ubuntu.sh
@@ -1,7 +1,7 @@
 #!/bin/bash
 sudo apt-get update
 sudo apt-get dist-ugprade
-sudo apt-get install meld whois zsh tmux vim atop aria2 curl pv pixz
+sudo apt-get install meld whois zsh tmux vim atop aria2 curl pv pixz gajim
 
 DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
 $DIR/install_common.sh