Merge branch 'master' of github.com:cyplo/dotfiles

This commit is contained in:
Cyryl Plotnicki-Chudyk 2014-11-13 11:36:59 +01:00
commit aeb7a3e105
12 changed files with 24 additions and 24 deletions

View file

@ -1,4 +1,4 @@
# generated by Slic3r 1.2.1-dev on Sat Oct 25 09:59:41 2014 # generated by Slic3r 1.2.1-dev on Thu Oct 30 18:49:14 2014
avoid_crossing_perimeters = 1 avoid_crossing_perimeters = 1
bottom_solid_layers = 1 bottom_solid_layers = 1
bridge_acceleration = 0 bridge_acceleration = 0
@ -16,12 +16,12 @@ extruder_clearance_height = 20
extruder_clearance_radius = 20 extruder_clearance_radius = 20
extrusion_width = 0 extrusion_width = 0
fill_angle = 45 fill_angle = 45
fill_density = 35% fill_density = 30%
fill_pattern = 3dhoneycomb fill_pattern = honeycomb
first_layer_acceleration = 0 first_layer_acceleration = 0
first_layer_extrusion_width = 200% first_layer_extrusion_width = 200%
first_layer_height = 0.3 first_layer_height = 0.2
first_layer_speed = 100% first_layer_speed = 90%
gap_fill_speed = 10 gap_fill_speed = 10
gcode_comments = 0 gcode_comments = 0
infill_acceleration = 0 infill_acceleration = 0
@ -30,7 +30,7 @@ infill_extruder = 1
infill_extrusion_width = 0 infill_extrusion_width = 0
infill_first = 0 infill_first = 0
infill_only_where_needed = 1 infill_only_where_needed = 1
infill_speed = 25 infill_speed = 20
interface_shells = 0 interface_shells = 0
layer_height = 0.2 layer_height = 0.2
min_skirt_length = 20 min_skirt_length = 20
@ -42,7 +42,7 @@ overhangs = 1
perimeter_acceleration = 0 perimeter_acceleration = 0
perimeter_extruder = 1 perimeter_extruder = 1
perimeter_extrusion_width = 0 perimeter_extrusion_width = 0
perimeter_speed = 25 perimeter_speed = 20
perimeters = 3 perimeters = 3
post_process = post_process =
raft_layers = 0 raft_layers = 0
@ -52,7 +52,7 @@ skirt_distance = 6
skirt_height = 1 skirt_height = 1
skirts = 1 skirts = 1
small_perimeter_speed = 15 small_perimeter_speed = 15
solid_fill_pattern = hilbertcurve solid_fill_pattern = rectilinear
solid_infill_below_area = 70 solid_infill_below_area = 70
solid_infill_every_layers = 0 solid_infill_every_layers = 0
solid_infill_extrusion_width = 0 solid_infill_extrusion_width = 0

View file

@ -1,4 +1,4 @@
# generated by Slic3r 1.2.1-dev on Sat Oct 25 10:00:40 2014 # generated by Slic3r 1.2.1-dev on Thu Oct 30 20:51:15 2014
avoid_crossing_perimeters = 1 avoid_crossing_perimeters = 1
bottom_solid_layers = 1 bottom_solid_layers = 1
bridge_acceleration = 0 bridge_acceleration = 0
@ -16,11 +16,11 @@ extruder_clearance_height = 20
extruder_clearance_radius = 20 extruder_clearance_radius = 20
extrusion_width = 0 extrusion_width = 0
fill_angle = 45 fill_angle = 45
fill_density = 35% fill_density = 40%
fill_pattern = 3dhoneycomb fill_pattern = honeycomb
first_layer_acceleration = 0 first_layer_acceleration = 0
first_layer_extrusion_width = 200% first_layer_extrusion_width = 200%
first_layer_height = 0.2 first_layer_height = 0.3
first_layer_speed = 90% first_layer_speed = 90%
gap_fill_speed = 10 gap_fill_speed = 10
gcode_comments = 0 gcode_comments = 0
@ -52,14 +52,14 @@ skirt_distance = 6
skirt_height = 1 skirt_height = 1
skirts = 1 skirts = 1
small_perimeter_speed = 15 small_perimeter_speed = 15
solid_fill_pattern = hilbertcurve solid_fill_pattern = rectilinear
solid_infill_below_area = 70 solid_infill_below_area = 70
solid_infill_every_layers = 0 solid_infill_every_layers = 0
solid_infill_extrusion_width = 0 solid_infill_extrusion_width = 0
solid_infill_speed = 20 solid_infill_speed = 20
spiral_vase = 0 spiral_vase = 0
standby_temperature_delta = -5 standby_temperature_delta = -5
support_material = 1 support_material = 0
support_material_angle = 0 support_material_angle = 0
support_material_enforce_layers = 0 support_material_enforce_layers = 0
support_material_extruder = 1 support_material_extruder = 1

View file

@ -1,4 +1,4 @@
# generated by Slic3r 1.2.1-dev on Sat Oct 25 10:00:57 2014 # generated by Slic3r 1.2.1-dev on Thu Oct 30 20:51:21 2014
autocenter = 1 autocenter = 1
background_processing = 1 background_processing = 1
last_output_path = /home/cyryl/reprap/models/gcode last_output_path = /home/cyryl/reprap/models/gcode

@ -1 +1 @@
Subproject commit b0bb781fc73ef40365e4c996a16f04368d64fc9d Subproject commit f8fd2ecce20f5005e6313ce57d6d2a209890c946

@ -1 +1 @@
Subproject commit 3541f15e5c1517940a84cebb3fa9070ce7ecf9b4 Subproject commit bdfd0a558898df77aa8fc4c7b142062fdee3b2f7

@ -1 +1 @@
Subproject commit 3ab1bb7eb0e533f4512dc2199a50d1238abcbb42 Subproject commit 246c217562dfd8541ee0d64600a628daa4195dd2

@ -1 +1 @@
Subproject commit c4713200f76550f3f310fe7e176925d3f4ec1809 Subproject commit 0374322ba5d85ae44dd9dc44ef31ca015a59097e

@ -1 +1 @@
Subproject commit 64ad9e46a5d3ac8f00273ffaee9baaca8032807d Subproject commit 39f011909620e0c7ae555efdace20c3963ac88af

@ -1 +1 @@
Subproject commit 2b23ddcf1883b57a779e005c8883892a6d3c5695 Subproject commit 74c9c60796ef10284ba26aaf38ffb39beae5f62c

@ -1 +1 @@
Subproject commit 4004c021af2fed1e30d22aeb28f6703dca652547 Subproject commit 64cce208388c10debd5b150de08d9be371bd0e86

@ -1 +1 @@
Subproject commit 819dca393e44dd3b358dfba96da6fb1f9aec23b5 Subproject commit 11d7c05bf97b6c4ae6985fa94b16f6c4e7a61b94

@ -1 +1 @@
Subproject commit c7606c20f4171b6a03831ed73851212084944813 Subproject commit ceab3f6bd7ba6f03f51e1f9f512b8f74df327356