diff --git a/.Slic3r/print/coarse abs 0.4.ini b/.Slic3r/print/coarse abs 0.4.ini
index 1166a651..d7ca912c 100644
--- a/.Slic3r/print/coarse abs 0.4.ini	
+++ b/.Slic3r/print/coarse abs 0.4.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.0 on Sat Oct 11 21:17:00 2014
+# generated by Slic3r 1.2.0 on Sun Oct 12 09:08:50 2014
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 3
 bridge_acceleration = 0
@@ -14,12 +14,12 @@ external_perimeters_first = 1
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0
+extrusion_width = 150%
 fill_angle = 45
 fill_density = 40%
-fill_pattern = honeycomb
+fill_pattern = 3dhoneycomb
 first_layer_acceleration = 0
-first_layer_extrusion_width = 200%
+first_layer_extrusion_width = 0
 first_layer_height = 0.3
 first_layer_speed = 80%
 gap_fill_speed = 10
@@ -32,7 +32,7 @@ infill_first = 0
 infill_only_where_needed = 1
 infill_speed = 45
 interface_shells = 0
-layer_height = 0.32
+layer_height = 0.3
 min_skirt_length = 20
 notes = 
 only_retract_when_crossing_perimeters = 1
diff --git a/.Slic3r/slic3r.ini b/.Slic3r/slic3r.ini
index 09452e42..6b2afc2a 100644
--- a/.Slic3r/slic3r.ini
+++ b/.Slic3r/slic3r.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.0 on Sat Oct 11 21:59:21 2014
+# generated by Slic3r 1.2.0 on Sun Oct 12 09:09:30 2014
 autocenter = 1
 background_processing = 1
 last_output_path = /run/user/1000/gvfs/sftp:host=192.168.1.152,user=pi/mnt/storage/home/pi/storage/files/reprap/gcode