From 6a5d07cc62efb09e40df3f72a08b13eec3219ec2 Mon Sep 17 00:00:00 2001
From: Cyryl Plotnicki-Chudyk <cyplo@cyplo.net>
Date: Sun, 12 Oct 2014 10:44:17 +0200
Subject: [PATCH] fighting solid infill overfill

---
 .Slic3r/print/coarse abs 0.4.ini | 12 ++++++------
 .Slic3r/slic3r.ini               |  2 +-
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/.Slic3r/print/coarse abs 0.4.ini b/.Slic3r/print/coarse abs 0.4.ini
index d7ca912c..5cec66b0 100644
--- a/.Slic3r/print/coarse abs 0.4.ini	
+++ b/.Slic3r/print/coarse abs 0.4.ini	
@@ -1,6 +1,6 @@
-# generated by Slic3r 1.2.0 on Sun Oct 12 09:08:50 2014
+# generated by Slic3r 1.2.0 on Sun Oct 12 10:38:01 2014
 avoid_crossing_perimeters = 1
-bottom_solid_layers = 3
+bottom_solid_layers = 1
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_speed = 20
@@ -14,14 +14,14 @@ external_perimeters_first = 1
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 150%
+extrusion_width = 100%
 fill_angle = 45
 fill_density = 40%
 fill_pattern = 3dhoneycomb
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.3
-first_layer_speed = 80%
+first_layer_speed = 100%
 gap_fill_speed = 10
 gcode_comments = 0
 infill_acceleration = 0
@@ -55,8 +55,8 @@ small_perimeter_speed = 15
 solid_fill_pattern = rectilinear
 solid_infill_below_area = 70
 solid_infill_every_layers = 7
-solid_infill_extrusion_width = 0
-solid_infill_speed = 30
+solid_infill_extrusion_width = 90%
+solid_infill_speed = 45
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
diff --git a/.Slic3r/slic3r.ini b/.Slic3r/slic3r.ini
index 6b2afc2a..ff8f9f06 100644
--- a/.Slic3r/slic3r.ini
+++ b/.Slic3r/slic3r.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.0 on Sun Oct 12 09:09:30 2014
+# generated by Slic3r 1.2.0 on Sun Oct 12 10:38:08 2014
 autocenter = 1
 background_processing = 1
 last_output_path = /run/user/1000/gvfs/sftp:host=192.168.1.152,user=pi/mnt/storage/home/pi/storage/files/reprap/gcode