diff --git a/.Slic3r/filament/Simple Mode.ini b/.Slic3r/filament/Simple Mode.ini new file mode 100644 index 00000000..ffbb12f2 --- /dev/null +++ b/.Slic3r/filament/Simple Mode.ini @@ -0,0 +1,16 @@ +# generated by Slic3r 1.1.6 on Sat Aug 2 20:10:57 2014 +bed_temperature = 60 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 1 +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 15 +filament_diameter = 1.75 +first_layer_bed_temperature = 60 +first_layer_temperature = 230 +max_fan_speed = 100 +min_fan_speed = 55 +min_print_speed = 10 +slowdown_below_layer_time = 5 +temperature = 230 diff --git a/.Slic3r/filament/black pla.ini b/.Slic3r/filament/black pla.ini new file mode 100644 index 00000000..76a8ddfd --- /dev/null +++ b/.Slic3r/filament/black pla.ini @@ -0,0 +1,16 @@ +# generated by Slic3r 1.1.6 on Sun Aug 3 18:45:33 2014 +bed_temperature = 60 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 1 +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 15 +filament_diameter = 1.75 +first_layer_bed_temperature = 60 +first_layer_temperature = 235 +max_fan_speed = 100 +min_fan_speed = 55 +min_print_speed = 10 +slowdown_below_layer_time = 5 +temperature = 235 diff --git a/.Slic3r/filament/fine purple pla.ini b/.Slic3r/filament/fine purple pla.ini new file mode 100644 index 00000000..563c081b --- /dev/null +++ b/.Slic3r/filament/fine purple pla.ini @@ -0,0 +1,16 @@ +# generated by Slic3r 1.1.7 on Thu Aug 7 19:32:55 2014 +bed_temperature = 60 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 1 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 15 +filament_diameter = 1.75 +first_layer_bed_temperature = 60 +first_layer_temperature = 235 +max_fan_speed = 100 +min_fan_speed = 55 +min_print_speed = 10 +slowdown_below_layer_time = 5 +temperature = 235 diff --git a/.Slic3r/filament/purple pla.ini b/.Slic3r/filament/purple pla.ini new file mode 100644 index 00000000..fc72a4f0 --- /dev/null +++ b/.Slic3r/filament/purple pla.ini @@ -0,0 +1,16 @@ +# generated by Slic3r 1.1.7 on Thu Aug 7 07:17:14 2014 +bed_temperature = 60 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 1 +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 15 +filament_diameter = 1.75 +first_layer_bed_temperature = 60 +first_layer_temperature = 235 +max_fan_speed = 100 +min_fan_speed = 55 +min_print_speed = 10 +slowdown_below_layer_time = 5 +temperature = 235 diff --git a/.Slic3r/print/Simple Mode.ini b/.Slic3r/print/Simple Mode.ini new file mode 100644 index 00000000..d09c146c --- /dev/null +++ b/.Slic3r/print/Simple Mode.ini @@ -0,0 +1,79 @@ +# generated by Slic3r 1.1.6 on Sun Aug 3 10:31:57 2014 +avoid_crossing_perimeters = 0 +bottom_solid_layers = 3 +bridge_acceleration = 0 +bridge_flow_ratio = 1 +bridge_speed = 60 +brim_width = 0 +complete_objects = 0 +default_acceleration = 0 +dont_support_bridges = 1 +external_perimeter_speed = 70% +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0 +fill_angle = 45 +fill_density = 35% +fill_pattern = honeycomb +first_layer_acceleration = 0 +first_layer_extrusion_width = 200% +first_layer_height = 0.4 +first_layer_speed = 45% +gap_fill_speed = 20 +gcode_comments = 0 +infill_acceleration = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 1 +infill_speed = 60 +interface_shells = 0 +layer_height = 0.4 +min_skirt_length = 0 +notes = +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 30 +perimeters = 3 +post_process = +raft_layers = 0 +resolution = 0 +seam_position = aligned +skirt_distance = 6 +skirt_height = 1 +skirts = 1 +small_perimeter_speed = 30 +solid_fill_pattern = hilbertcurve +solid_infill_below_area = 70 +solid_infill_every_layers = 5 +solid_infill_extrusion_width = 0 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = pillars +support_material_spacing = 2.5 +support_material_speed = 60 +support_material_threshold = 0 +thin_walls = 1 +threads = 2 +top_infill_extrusion_width = 0 +top_solid_infill_speed = 50 +top_solid_layers = 3 +travel_speed = 130 diff --git a/.Slic3r/print/coarse0.4.ini b/.Slic3r/print/coarse0.4.ini new file mode 100644 index 00000000..6c962482 --- /dev/null +++ b/.Slic3r/print/coarse0.4.ini @@ -0,0 +1,79 @@ +# generated by Slic3r 1.1.6 on Sun Aug 3 13:20:02 2014 +avoid_crossing_perimeters = 1 +bottom_solid_layers = 3 +bridge_acceleration = 0 +bridge_flow_ratio = 1 +bridge_speed = 60 +brim_width = 0 +complete_objects = 0 +default_acceleration = 0 +dont_support_bridges = 1 +external_perimeter_speed = 70% +external_perimeters_first = 1 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0 +fill_angle = 45 +fill_density = 35% +fill_pattern = honeycomb +first_layer_acceleration = 0 +first_layer_extrusion_width = 200% +first_layer_height = 0.4 +first_layer_speed = 45% +gap_fill_speed = 20 +gcode_comments = 0 +infill_acceleration = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 1 +infill_speed = 60 +interface_shells = 0 +layer_height = 0.35 +min_skirt_length = 0 +notes = +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 30 +perimeters = 3 +post_process = +raft_layers = 0 +resolution = 0 +seam_position = random +skirt_distance = 6 +skirt_height = 1 +skirts = 1 +small_perimeter_speed = 30 +solid_fill_pattern = hilbertcurve +solid_infill_below_area = 70 +solid_infill_every_layers = 5 +solid_infill_extrusion_width = 0 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = pillars +support_material_spacing = 2.5 +support_material_speed = 60 +support_material_threshold = 0 +thin_walls = 1 +threads = 8 +top_infill_extrusion_width = 0 +top_solid_infill_speed = 50 +top_solid_layers = 4 +travel_speed = 130 diff --git a/.Slic3r/print/fine0.4.ini b/.Slic3r/print/fine0.4.ini new file mode 100644 index 00000000..6f64db2f --- /dev/null +++ b/.Slic3r/print/fine0.4.ini @@ -0,0 +1,79 @@ +# generated by Slic3r 1.1.6 on Sun Aug 3 14:31:39 2014 +avoid_crossing_perimeters = 1 +bottom_solid_layers = 3 +bridge_acceleration = 0 +bridge_flow_ratio = 1 +bridge_speed = 60 +brim_width = 0 +complete_objects = 0 +default_acceleration = 0 +dont_support_bridges = 1 +external_perimeter_speed = 70% +external_perimeters_first = 1 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0 +fill_angle = 45 +fill_density = 40% +fill_pattern = honeycomb +first_layer_acceleration = 0 +first_layer_extrusion_width = 200% +first_layer_height = 0.4 +first_layer_speed = 45% +gap_fill_speed = 20 +gcode_comments = 0 +infill_acceleration = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 1 +infill_speed = 60 +interface_shells = 0 +layer_height = 0.2 +min_skirt_length = 0 +notes = +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 30 +perimeters = 3 +post_process = +raft_layers = 0 +resolution = 0 +seam_position = random +skirt_distance = 6 +skirt_height = 1 +skirts = 1 +small_perimeter_speed = 30 +solid_fill_pattern = hilbertcurve +solid_infill_below_area = 70 +solid_infill_every_layers = 5 +solid_infill_extrusion_width = 0 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = pillars +support_material_spacing = 2.5 +support_material_speed = 60 +support_material_threshold = 0 +thin_walls = 1 +threads = 8 +top_infill_extrusion_width = 0 +top_solid_infill_speed = 50 +top_solid_layers = 4 +travel_speed = 130 diff --git a/.Slic3r/printer/Simple Mode.ini b/.Slic3r/printer/Simple Mode.ini new file mode 100644 index 00000000..c55bba68 --- /dev/null +++ b/.Slic3r/printer/Simple Mode.ini @@ -0,0 +1,23 @@ +# generated by Slic3r 1.1.6 on Sat Aug 2 20:52:03 2014 +bed_size = 170,170 +end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n +extruder_offset = 0x0 +gcode_flavor = reprap +layer_gcode = +nozzle_diameter = 0.4 +print_center = 85,85 +retract_before_travel = 2 +retract_layer_change = 1 +retract_length = 2 +retract_length_toolchange = 10 +retract_lift = 0 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 30 +start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 0 +vibration_limit = 0 +wipe = 0 +z_offset = 0 diff --git a/.Slic3r/printer/printer.ini b/.Slic3r/printer/printer.ini new file mode 100644 index 00000000..bdadaebb --- /dev/null +++ b/.Slic3r/printer/printer.ini @@ -0,0 +1,23 @@ +# generated by Slic3r 1.1.6 on Sun Aug 3 13:18:19 2014 +bed_size = 170,170 +end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n +extruder_offset = 0x0 +gcode_flavor = reprap +layer_gcode = +nozzle_diameter = 0.4 +print_center = 85,85 +retract_before_travel = 2 +retract_layer_change = 1 +retract_length = 3 +retract_length_toolchange = 10 +retract_lift = 0 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 30 +start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 0 +vibration_limit = 0 +wipe = 0 +z_offset = 0 diff --git a/.Slic3r/simple.ini b/.Slic3r/simple.ini new file mode 100644 index 00000000..291a60c2 --- /dev/null +++ b/.Slic3r/simple.ini @@ -0,0 +1,120 @@ +# generated by Slic3r 1.1.6 on Sat Aug 2 20:09:23 2014 +avoid_crossing_perimeters = 1 +bed_size = 200,200 +bed_temperature = 60 +bottom_solid_layers = 3 +bridge_acceleration = 0 +bridge_fan_speed = 100 +bridge_flow_ratio = 1 +bridge_speed = 60 +brim_width = 0 +complete_objects = 0 +cooling = 1 +default_acceleration = 0 +disable_fan_first_layers = 1 +dont_support_bridges = 1 +duplicate_distance = 6 +end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n +external_perimeter_speed = 70% +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extruder_offset = 0x0 +extrusion_axis = E +extrusion_multiplier = 1 +extrusion_width = 0 +fan_always_on = 0 +fan_below_layer_time = 60 +filament_diameter = 1.75 +fill_angle = 45 +fill_density = 40% +fill_pattern = honeycomb +first_layer_acceleration = 0 +first_layer_bed_temperature = 60 +first_layer_extrusion_width = 200% +first_layer_height = 0.4 +first_layer_speed = 30% +first_layer_temperature = 230 +g0 = 0 +gap_fill_speed = 20 +gcode_arcs = 0 +gcode_comments = 0 +gcode_flavor = reprap +infill_acceleration = 0 +infill_every_layers = 10 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 0 +infill_speed = 60 +interface_shells = 0 +layer_gcode = +layer_height = 0.3 +max_fan_speed = 100 +min_fan_speed = 35 +min_print_speed = 10 +min_skirt_length = 0 +notes = +nozzle_diameter = 0.4 +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 30 +perimeters = 3 +post_process = +print_center = 100,100 +raft_layers = 0 +resolution = 0 +retract_before_travel = 2 +retract_layer_change = 1 +retract_length = 2 +retract_length_toolchange = 10 +retract_lift = 0 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 30 +seam_position = aligned +skirt_distance = 6 +skirt_height = 1 +skirts = 1 +slowdown_below_layer_time = 30 +small_perimeter_speed = 30 +solid_fill_pattern = rectilinear +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extrusion_width = 0 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n +support_material = 0 +support_material_angle = 0 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = pillars +support_material_spacing = 2.5 +support_material_speed = 60 +support_material_threshold = 0 +temperature = 230 +thin_walls = 1 +threads = 2 +toolchange_gcode = +top_infill_extrusion_width = 0 +top_solid_infill_speed = 50 +top_solid_layers = 3 +travel_speed = 130 +use_firmware_retraction = 0 +use_relative_e_distances = 0 +vibration_limit = 0 +wipe = 0 +z_offset = 0 diff --git a/.Slic3r/slic3r.ini b/.Slic3r/slic3r.ini new file mode 100644 index 00000000..e6b7a9e0 --- /dev/null +++ b/.Slic3r/slic3r.ini @@ -0,0 +1,16 @@ +# generated by Slic3r 1.1.7 on Thu Aug 7 19:55:53 2014 +autocenter = 1 +last_output_path = /home/cyryl/RepRap/models +last_version_check = 1407388369 +mode = expert +remember_output_path = 1 +version = 1.1.7 +version_check = 1 + +[presets] +filament = fine purple pla.ini +print = fine0.4.ini +printer = printer.ini + +[recent] +skein_directory = /home/cyryl/Downloads