colder bed for abs as buildtakk in use

.Slic3r/filament/black pla 0.4.ini

@@ -1,5 +1,5 @@
-# generated by Slic3r 1.1.7 on Sun Aug 17 12:07:47 2014
-bed_temperature = 70
+# generated by Slic3r 1.1.7 on Mon Sep 15 20:24:45 2014
+bed_temperature = 60
 bridge_fan_speed = 100
 cooling = 1
 disable_fan_first_layers = 1
@@ -7,7 +7,7 @@ extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 15
 filament_diameter = 1.75
-first_layer_bed_temperature = 80
+first_layer_bed_temperature = 60
 first_layer_temperature = 210
 max_fan_speed = 100
 min_fan_speed = 55

.Slic3r/filament/pink abs 0.4.ini

@@ -0,0 +1,16 @@
+# generated by Slic3r 1.1.7 on Tue Sep 23 18:19:52 2014
+bed_temperature = 60
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 1.75
+first_layer_bed_temperature = 60
+first_layer_temperature = 235
+max_fan_speed = 100
+min_fan_speed = 60
+min_print_speed = 10
+slowdown_below_layer_time = 30
+temperature = 235

.Slic3r/print/fine pla 0.4.ini

@@ -0,0 +1,79 @@
+# generated by Slic3r 1.1.7 on Sun Sep 14 13:14:08 2014
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_speed = 70%
+external_perimeters_first = 1
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0
+fill_angle = 45
+fill_density = 40%
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.3
+first_layer_speed = 45%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 1
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.3
+min_skirt_length = 30
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = random
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 30
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 70
+solid_infill_every_layers = 5
+solid_infill_extrusion_width = 0
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = pillars
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 0
+thin_walls = 1
+threads = 8
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 50
+top_solid_layers = 4
+travel_speed = 130

.Slic3r/slic3r.ini

@@ -1,6 +1,6 @@
-# generated by Slic3r 1.1.7 on Sun Aug 17 12:07:47 2014
+# generated by Slic3r 1.1.7 on Tue Sep 23 18:19:56 2014
 autocenter = 1
-last_output_path = /home/cyryl/RepRap/models
+last_output_path = /home/cyryl/Downloads
 last_version_check = 1407388369
 mode = expert
 remember_output_path = 1
@@ -8,9 +8,9 @@ version = 1.1.7
 version_check = 1
 
 [presets]
-filament = black pla 0.4.ini
-print = coarse pla 0.4.ini
+filament = pink abs 0.4.ini
+print = fine pla 0.4.ini
 printer = printer 0.4.ini
 
 [recent]
-skein_directory = /home/cyryl/RepRap/models/PrusaMendel/metric-prusa-lm8uu
+skein_directory = /home/cyryl/Downloads