split abs prints into coarse and fine

.Slic3r/print/coarse abs 0.4.ini

@@ -0,0 +1,81 @@
+# generated by Slic3r 1.2.1-dev on Sat Oct 25 09:59:41 2014
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 1
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 20
+brim_width = 0
+complete_objects = 0
+default_acceleration = 1500
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 25
+external_perimeters_first = 1
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0
+fill_angle = 45
+fill_density = 35%
+fill_pattern = 3dhoneycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.3
+first_layer_speed = 100%
+gap_fill_speed = 10
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 1
+infill_speed = 25
+interface_shells = 0
+layer_height = 0.2
+min_skirt_length = 20
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 1
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 25
+perimeters = 3
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = random
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 15
+solid_fill_pattern = hilbertcurve
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extrusion_width = 0
+solid_infill_speed = 20
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 20
+support_material_pattern = pillars
+support_material_spacing = 2.5
+support_material_speed = 20
+support_material_threshold = 0
+thin_walls = 1
+threads = 8
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 3
+travel_speed = 50
+xy_size_compensation = 0

.Slic3r/print/fine abs 0.4.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.1-dev on Thu Oct 23 20:34:34 2014
+# generated by Slic3r 1.2.1-dev on Sat Oct 25 10:00:40 2014
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 1
 bridge_acceleration = 0
@@ -20,8 +20,8 @@ fill_density = 35%
 fill_pattern = 3dhoneycomb
 first_layer_acceleration = 0
 first_layer_extrusion_width = 200%
-first_layer_height = 0.3
+first_layer_height = 0.2
-first_layer_speed = 100%
+first_layer_speed = 90%
 gap_fill_speed = 10
 gcode_comments = 0
 infill_acceleration = 0
@@ -30,9 +30,9 @@ infill_extruder = 1
 infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 1
-infill_speed = 25
+infill_speed = 20
 interface_shells = 0
-layer_height = 0.2
+layer_height = 0.1
 min_skirt_length = 20
 notes = 
 only_retract_when_crossing_perimeters = 1
@@ -42,7 +42,7 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 25
+perimeter_speed = 20
 perimeters = 3
 post_process = 
 raft_layers = 0

.Slic3r/slic3r.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.1-dev on Sat Oct 25 09:57:56 2014
+# generated by Slic3r 1.2.1-dev on Sat Oct 25 10:00:57 2014
 autocenter = 1
 background_processing = 1
 last_output_path = /home/cyryl/reprap/models/gcode