From 31179620aabb981f84e73c22feda695ccb30de4c Mon Sep 17 00:00:00 2001 From: Cyryl Plotnicki-Chudyk Date: Sun, 12 Oct 2014 11:18:17 +0200 Subject: [PATCH] trying different settings to make holes better --- .Slic3r/print/coarse abs 0.4.ini | 14 +++++++------- .Slic3r/print/fine abs 0.4.ini | 24 ++++++++++++------------ .Slic3r/printer/printer 0.4.ini | 11 +++++------ .Slic3r/slic3r.ini | 4 ++-- 4 files changed, 26 insertions(+), 27 deletions(-) diff --git a/.Slic3r/print/coarse abs 0.4.ini b/.Slic3r/print/coarse abs 0.4.ini index 5cec66b0..3d043f0f 100644 --- a/.Slic3r/print/coarse abs 0.4.ini +++ b/.Slic3r/print/coarse abs 0.4.ini @@ -1,4 +1,4 @@ -# generated by Slic3r 1.2.0 on Sun Oct 12 10:38:01 2014 +# generated by Slic3r 1.2.0 on Sun Oct 12 11:08:08 2014 avoid_crossing_perimeters = 1 bottom_solid_layers = 1 bridge_acceleration = 0 @@ -6,7 +6,7 @@ bridge_flow_ratio = 1 bridge_speed = 20 brim_width = 0 complete_objects = 0 -default_acceleration = 1000 +default_acceleration = 1500 dont_support_bridges = 1 external_perimeter_extrusion_width = 0 external_perimeter_speed = 70% @@ -17,7 +17,7 @@ extruder_clearance_radius = 20 extrusion_width = 100% fill_angle = 45 fill_density = 40% -fill_pattern = 3dhoneycomb +fill_pattern = honeycomb first_layer_acceleration = 0 first_layer_extrusion_width = 0 first_layer_height = 0.3 @@ -30,13 +30,13 @@ infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 1 -infill_speed = 45 +infill_speed = 50 interface_shells = 0 layer_height = 0.3 min_skirt_length = 20 notes = only_retract_when_crossing_perimeters = 1 -ooze_prevention = 0 +ooze_prevention = 1 output_filename_format = [input_filename_base].gcode overhangs = 1 perimeter_acceleration = 0 @@ -56,10 +56,10 @@ solid_fill_pattern = rectilinear solid_infill_below_area = 70 solid_infill_every_layers = 7 solid_infill_extrusion_width = 90% -solid_infill_speed = 45 +solid_infill_speed = 50 spiral_vase = 0 standby_temperature_delta = -5 -support_material = 0 +support_material = 1 support_material_angle = 0 support_material_enforce_layers = 0 support_material_extruder = 1 diff --git a/.Slic3r/print/fine abs 0.4.ini b/.Slic3r/print/fine abs 0.4.ini index 2ed252d7..7b1a5cdd 100644 --- a/.Slic3r/print/fine abs 0.4.ini +++ b/.Slic3r/print/fine abs 0.4.ini @@ -1,12 +1,12 @@ -# generated by Slic3r 1.2.0 on Sat Oct 11 15:14:10 2014 +# generated by Slic3r 1.2.0 on Sun Oct 12 11:08:33 2014 avoid_crossing_perimeters = 1 -bottom_solid_layers = 3 +bottom_solid_layers = 1 bridge_acceleration = 0 bridge_flow_ratio = 1 bridge_speed = 20 brim_width = 0 complete_objects = 0 -default_acceleration = 1000 +default_acceleration = 1500 dont_support_bridges = 1 external_perimeter_extrusion_width = 0 external_perimeter_speed = 70% @@ -14,14 +14,14 @@ external_perimeters_first = 1 extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 -extrusion_width = 0 +extrusion_width = 100% fill_angle = 45 fill_density = 40% fill_pattern = honeycomb first_layer_acceleration = 0 -first_layer_extrusion_width = 200% +first_layer_extrusion_width = 0 first_layer_height = 0.3 -first_layer_speed = 80% +first_layer_speed = 100% gap_fill_speed = 10 gcode_comments = 0 infill_acceleration = 0 @@ -30,19 +30,19 @@ infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 1 -infill_speed = 45 +infill_speed = 50 interface_shells = 0 layer_height = 0.2 min_skirt_length = 20 notes = only_retract_when_crossing_perimeters = 1 -ooze_prevention = 0 +ooze_prevention = 1 output_filename_format = [input_filename_base].gcode overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 -perimeter_speed = 15 +perimeter_speed = 30 perimeters = 3 post_process = raft_layers = 0 @@ -55,11 +55,11 @@ small_perimeter_speed = 15 solid_fill_pattern = rectilinear solid_infill_below_area = 70 solid_infill_every_layers = 7 -solid_infill_extrusion_width = 0 -solid_infill_speed = 20 +solid_infill_extrusion_width = 90% +solid_infill_speed = 50 spiral_vase = 0 standby_temperature_delta = -5 -support_material = 0 +support_material = 1 support_material_angle = 0 support_material_enforce_layers = 0 support_material_extruder = 1 diff --git a/.Slic3r/printer/printer 0.4.ini b/.Slic3r/printer/printer 0.4.ini index d51bf96a..e313468b 100644 --- a/.Slic3r/printer/printer 0.4.ini +++ b/.Slic3r/printer/printer 0.4.ini @@ -1,14 +1,13 @@ -# generated by Slic3r 1.1.7 on Sun Aug 17 11:02:28 2014 -bed_size = 170,170 +# generated by Slic3r 1.2.0 on Sun Oct 12 11:05:35 2014 +bed_shape = 0x0,170x0,170x170,0x170 end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n extruder_offset = 0x0 gcode_flavor = reprap layer_gcode = nozzle_diameter = 0.4 -print_center = 85,85 -retract_before_travel = 2 +retract_before_travel = 5 retract_layer_change = 1 -retract_length = 3 +retract_length = 1 retract_length_toolchange = 10 retract_lift = 0 retract_restart_extra = 0 @@ -19,5 +18,5 @@ toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 0 vibration_limit = 0 -wipe = 0 +wipe = 1 z_offset = 0 diff --git a/.Slic3r/slic3r.ini b/.Slic3r/slic3r.ini index ff8f9f06..3f21e98d 100644 --- a/.Slic3r/slic3r.ini +++ b/.Slic3r/slic3r.ini @@ -1,4 +1,4 @@ -# generated by Slic3r 1.2.0 on Sun Oct 12 10:38:08 2014 +# generated by Slic3r 1.2.0 on Sun Oct 12 11:08:34 2014 autocenter = 1 background_processing = 1 last_output_path = /run/user/1000/gvfs/sftp:host=192.168.1.152,user=pi/mnt/storage/home/pi/storage/files/reprap/gcode @@ -10,7 +10,7 @@ version_check = 1 [presets] filament = pink abs 0.4.ini -print = coarse abs 0.4.ini +print = fine abs 0.4.ini printer = printer 0.4.ini [recent]