From 1d33a880da48c476ec1fc97eae367f0fff993627 Mon Sep 17 00:00:00 2001
From: Cyryl Plotnicki-Chudyk <cyplo@cyplo.net>
Date: Sat, 11 Oct 2014 21:45:15 +0200
Subject: [PATCH] faster movements allowed as electronics now have better
 cooling

---
 .Slic3r/print/coarse abs 0.4.ini | 8 ++++----
 .Slic3r/slic3r.ini               | 2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/.Slic3r/print/coarse abs 0.4.ini b/.Slic3r/print/coarse abs 0.4.ini
index fd2ff914..1166a651 100644
--- a/.Slic3r/print/coarse abs 0.4.ini	
+++ b/.Slic3r/print/coarse abs 0.4.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.0 on Sat Oct 11 17:20:12 2014
+# generated by Slic3r 1.2.0 on Sat Oct 11 21:17:00 2014
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 3
 bridge_acceleration = 0
@@ -32,7 +32,7 @@ infill_first = 0
 infill_only_where_needed = 1
 infill_speed = 45
 interface_shells = 0
-layer_height = 0.33
+layer_height = 0.32
 min_skirt_length = 20
 notes = 
 only_retract_when_crossing_perimeters = 1
@@ -42,7 +42,7 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 15
+perimeter_speed = 30
 perimeters = 3
 post_process = 
 raft_layers = 0
@@ -56,7 +56,7 @@ solid_fill_pattern = rectilinear
 solid_infill_below_area = 70
 solid_infill_every_layers = 7
 solid_infill_extrusion_width = 0
-solid_infill_speed = 20
+solid_infill_speed = 30
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
diff --git a/.Slic3r/slic3r.ini b/.Slic3r/slic3r.ini
index 446dea51..fb393958 100644
--- a/.Slic3r/slic3r.ini
+++ b/.Slic3r/slic3r.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.0 on Sat Oct 11 17:22:27 2014
+# generated by Slic3r 1.2.0 on Sat Oct 11 21:40:52 2014
 autocenter = 1
 background_processing = 1
 last_output_path = /run/user/1000/gvfs/sftp:host=192.168.1.152,user=pi/mnt/storage/home/pi/storage/files/reprap/gcode