dotfiles/.Slic3r/filament/pink abs 0.4.ini

# generated by Slic3r 1.2.1-dev on Sat Oct 25 09:47:11 2014
bed_temperature = 70
bridge_fan_speed = 100
cooling = 0
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 1.75
first_layer_bed_temperature = 60
first_layer_temperature = 235
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 2
slowdown_below_layer_time = 30
temperature = 235
use multiplier of 1 for extrusion, as E-steps tuned 2014-10-25 09:55:34 +02:00			`# generated by Slic3r 1.2.1-dev on Sat Oct 25 09:47:11 2014`
slightly higher bed temperature for abs prints to avoid warping on the larger ones 2014-10-16 18:13:21 +02:00			`bed_temperature = 70`
colder bed for abs as buildtakk in use 2014-09-23 18:55:45 +02:00			`bridge_fan_speed = 100`
less plastic flowing, slightly slower prints, always cool prints 2014-10-23 20:21:31 +02:00			`cooling = 0`
colder bed for abs as buildtakk in use 2014-09-23 18:55:45 +02:00			`disable_fan_first_layers = 1`
use multiplier of 1 for extrusion, as E-steps tuned 2014-10-25 09:55:34 +02:00			`extrusion_multiplier = 1`
less plastic flowing, slightly slower prints, always cool prints 2014-10-23 20:21:31 +02:00			`fan_always_on = 1`
colder bed for abs as buildtakk in use 2014-09-23 18:55:45 +02:00			`fan_below_layer_time = 60`
			`filament_diameter = 1.75`
less plastic flowing, slightly slower prints, always cool prints 2014-10-23 20:21:31 +02:00			`first_layer_bed_temperature = 60`
colder bed for abs as buildtakk in use 2014-09-23 18:55:45 +02:00			`first_layer_temperature = 235`
			`max_fan_speed = 100`
less plastic flowing, slightly slower prints, always cool prints 2014-10-23 20:21:31 +02:00			`min_fan_speed = 100`
			`min_print_speed = 2`
colder bed for abs as buildtakk in use 2014-09-23 18:55:45 +02:00			`slowdown_below_layer_time = 30`
			`temperature = 235`