107 lines
4 KiB
Markdown
107 lines
4 KiB
Markdown
|
---
|
||
|
|
title: Booting Gentoo with LUKS+LVM2+systemd
|
||
|
|
date: 2013-11-10 21:20:26
|
||
|
|
tags: [gentoo, linux, luks, systemd]
|
||
|
|
category: linux
|
||
|
|
---
|
||
|
|
|
||
|
|
I've spent quite some time recently trying to get a laptop running
|
||
|
|
Gentoo boot from an encrypted partition with LVM. I thought that this
|
||
|
|
might be useful for someone else, so here you are: First things first:
|
||
|
|
I'm assuming you've followed Gentoo handbook and are operating from
|
||
|
|
within livecd's shell. You've done the regular luksFormat + lvm stuff
|
||
|
|
and you've come up with a layout similar to this one:
|
||
|
|
|
||
|
|
```
|
||
|
|
dagrey ~ # lsblk
|
||
|
|
NAME SIZE TYPE MOUNTPOINT
|
||
|
|
sda 55.9G disk
|
||
|
|
└─sda1 55.9G part
|
||
|
|
└─crypthome (dm-3) 55.9G crypt /home
|
||
|
|
sdb 29.8G disk
|
||
|
|
├─sdb1 485.4M part /boot
|
||
|
|
└─sdb2 29.4G part
|
||
|
|
└─root_sdb2-vg-root (dm-0) 29.3G crypt
|
||
|
|
├─vg-swap (dm-1) 8G lvm [SWAP]
|
||
|
|
└─vg-root (dm-2) 21.3G lvm /
|
||
|
|
```
|
||
|
|
|
||
|
|
You need a kernel to boot this, a kernel that understands crypto stuff as well as
|
||
|
|
lvm.
|
||
|
|
|
||
|
|
`genkernel --symlink --save-config --no-mrproper --luks --lvm --udev --menuconfig all`
|
||
|
|
|
||
|
|
If you're using `gentoo-sources` you'll notice the fancy gentoo-specific menu on top. Go there and check
|
||
|
|
systemd. Apart from the usual stuff, please make sure to check stuff on
|
||
|
|
[this list](https://wiki.gentoo.org/wiki/Systemd), and also this one:
|
||
|
|
|
||
|
|
```
|
||
|
|
Device Drivers
|
||
|
|
Multi-device support (RAID and LVM)
|
||
|
|
[*] Multiple devices driver support (RAID and LVM)
|
||
|
|
<*> Device mapper support
|
||
|
|
<*> Crypt target support
|
||
|
|
|
||
|
|
Cryptographic API
|
||
|
|
<*> SHA256 digest algorithm
|
||
|
|
<*> AES cipher algorithms
|
||
|
|
```
|
||
|
|
|
||
|
|
Your setup is so new that you need grub2. Grub2 is very picky about its configuration. Take this one and
|
||
|
|
avoid hours of reading:
|
||
|
|
|
||
|
|
```
|
||
|
|
dagrey ~ # cat /etc/default/grub
|
||
|
|
|
||
|
|
GRUB_DISTRIBUTOR="Gentoo"
|
||
|
|
|
||
|
|
GRUB_DEFAULT=0
|
||
|
|
GRUB_HIDDEN_TIMEOUT=0
|
||
|
|
GRUB_HIDDEN_TIMEOUT_QUIET=true
|
||
|
|
GRUB_TIMEOUT=3
|
||
|
|
|
||
|
|
GRUB_PRELOAD_MODULES=lvm
|
||
|
|
GRUB_CRYPTODISK_ENABLE=y
|
||
|
|
GRUB_DEVICE=/dev/ram0
|
||
|
|
|
||
|
|
# Append parameters to the linux kernel command line
|
||
|
|
GRUB_CMDLINE_LINUX="real_init=/usr/bin/systemd quiet real_root=/dev/mapper/vg-root crypt_root=/dev/sdb2 dolvm acpi_backlight=vendor"
|
||
|
|
```
|
||
|
|
|
||
|
|
You're using initrd to set everything up for the kernel, so you need `real_root` and `real_init` instead of
|
||
|
|
regular ones. `cryptdevice` no longer works, use `crypt_root` And
|
||
|
|
`dolvm` is essential, without it only the first part will work, leaving
|
||
|
|
you with open crypt container and kernel panic just afterwards. Also
|
||
|
|
notice `GRUB_DEVICE`, `GRUB_CRYPTODISK_ENABLE` and `GRUB_PRELOAD_MODULES`. Make sure the first partition on the disk you're
|
||
|
|
installing grub onto is starting at 2048. If it's any earlier grub just
|
||
|
|
won't be able to fit its magic in there. Finally, install grub
|
||
|
|
|
||
|
|
```
|
||
|
|
grub2-install --modules="configfile linux crypto search_fs_uuid luks lvm" --recheck /dev/sda
|
||
|
|
grub2-mkconfig -o /boot/grub/grub.cfg
|
||
|
|
```
|
||
|
|
|
||
|
|
That should be sufficient to boot the system and initialize root. What
|
||
|
|
about those other encrypted partitions like `/home` though ? Well, init
|
||
|
|
subsystem needs to initialize them, OpenRC did such by reading
|
||
|
|
`/etc/fstab` and then `/etc/dmcrypt/dmcrypt.conf` accordingly. Systemd is a
|
||
|
|
bit different here. You still need your `/etc/fstab` entries for it to
|
||
|
|
know which partitions need to be initialized. The place where you say
|
||
|
|
how to map and decrypt crypto containers, however, is in `/etc/crypttab.`
|
||
|
|
|
||
|
|
```
|
||
|
|
dagrey ~ # cat /etc/fstab
|
||
|
|
|
||
|
|
/dev/sdb1 /boot ext2 defaults 1 2
|
||
|
|
/dev/mapper/vg-root / ext4 defaults 0 1
|
||
|
|
/dev/mapper/vg-swap none swap sw 0 0
|
||
|
|
/dev/mapper/crypthome /home ext4 defaults 0 2
|
||
|
|
|
||
|
|
dagrey ~ # cat /etc/crypttab
|
||
|
|
#crypthome /dev/sda1
|
||
|
|
crypthome /dev/sda1 /etc/conf.d/dmcrypt.key
|
||
|
|
```
|
||
|
|
|
||
|
|
The keyfile is available from then already decrypted root partition. You can also skip the key and the
|
||
|
|
you'll get a password prompt, sometimes hidden somewhere in systemd messages. Hit enter to reveal it once more.
|